FTDI Chip, 5 V TTL Wire End USB to UART Cable, TTL-232R-5V-WE

  • RS-stocknr. 687-7786
  • Fabrikantnummer TTL-232R-5V-WE
  • Fabrikant FTDI Chip
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

FTDI Chip USB To UART Cable

The FTDI chip USB to UART cable is a fast and simple way to connect devices with a TTL level serial interface to USB. It is available with TTL logic level of 5V. Each cable contains a small internal electronic circuit board, utilising the FT232R, encapsulated into the USB connector at the end of the cable. The cable has a gauge of 24AWG and diameter of 5mm. They are un-terminated, bare and tinned wires. The circuit is powered from the USB using 5V power pins and any VCC connection, always at 5VDC. These cables are supported with Microsoft WHQL certified VCP drivers for Windows, Apple Mac, and Linux.

Features and Benefits

Connect directly to a microcontroller UART or I/O pins
Data transfer rate is up to 3Mbps
Low USB bandwidth consumption
Maximum output of 250mA on VCC
Operating temperature ranges between -40°C and 85°C
Provides a USB to TTL Serial interface with various end connectors
Powered from USB connector
Six core cable with length of 1.8m
UHCI/OHCI/EHCI host controller compatible
Unique serial number attached, used for security purposes while transferring files via cable
USB 2.0 full speed compatible
Various UART-end connector options available

Applications

Communication
Embedded system

Certifications

CE
FCC approved

Specificaties
Kenmerk Waarde
Interface Function USB to UART
Kit Classification Cable
Kit Name 5 V TTL Wire End
77 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1330 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
19,29
(excl. BTW)
23,34
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 19,29
10 - 19
€ 17,43
20 - 49
€ 16,58
50 - 99
€ 16,08
100 +
€ 14,70
Related Products
These modules are MCU to USB host controller ...
Description:
These modules are MCU to USB host controller development modules for the Vinculum VNC1L device. They are supplied on a PCB designed to fit into 24-pin or 40-pin DIP sockets and provide access to the UART, parallel FIFO and SPI ...
Versions Available:(730-0142) - USB to Serial/FIFO (Dual) - ...
Description:
Versions Available:(730-0142) - USB to Serial/FIFO (Dual) - FT2232H MINI MODULE(730-0146) - USB to Serial/FIFO (Quad) - FT4232H MINI MODULE(111-5835) - USB to Serial/FIFO (Dual) - FT2232H-56Q MINI MODULE(111-5836) - USB to Serial/FIFO (Quad) - FT4232H-56Q MINI MODULE.
The USB-COM-PLUS modules provide a simple method of ...
Description:
The USB-COM-PLUS modules provide a simple method of adapting legacy serial devices with RS-232, RS-422 or RS-485 interfaces to modern USB ports. (687-7730) USB-COM232-Plus1 - USB to RS232 Adapter(687-7749) USB-COM232-Plus2 - USB to Dual RS232 Adapter(687-7742) USB-COM232-Plus4 - USB to ...
Designed to replace an existing DE9 connector, (male ...
Description:
Designed to replace an existing DE9 connector, (male or female) RS-232/TTL UART connection with a drop-in USB replacement connection. Miniaturised modules which closely resemble a DE9 connector for PCB mountingUSB mini-B socket connectorThe modules contain a USB-Serial bridge IC and ...