Lantronix, xPico Ethernet Interface Board, XPC100100K-02

  • RS-stocknr. 783-2744
  • Fabrikantnummer XPC100100K-02
  • Fabrikant Lantronix
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

xPico Ethernet Embedded Device Server

xPico is an extremely compact System-on-Module that provides 10Base-T or 100Base-TX Ethernet connectivity on virtually any device with a UART serial interface. The included industry-proven Lantronix device server application and full IP stack allow seamless remote access to device data simplifying design integration while providing robust connectivity. A key feature of the xPico is that there is virtually no need to write a single line of code, translating to a much lower development cost and faster time-to-market.

XPC100100B-01 xPico Ethernet Module (RS Part No. 783-2740)
Ethernet 10Base-T or 100Base-TX (Auto-sensing)
Protocols: TCP/IP, UDP/IP, ARP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, AutoIP, and HTTP
SNMP, Telnet, Serial, Internal Web Server, and Microsoft Windows-based utility for web configuration
Security: 256-bit AES Encryption
Internal Web Server: Storage Capacity: 384KB for Web Pages
Based on the DSTni-EX Enhanced 16-bit x86 architecture with 512KB Flash memory, 256KB SRAM
Firmware upgradeable via TFTP and Serial Port
Host communication: serial UART with RTS/CTS flow control
Data Rate: 300bps to 921.6kbps
8 x GPIO pins
Power supply: +3.3Vdc
Operating temperature range: -40 to +85°C
Package format: SMT
Dimensions: 24 x 16.5 x 5.64mm
Included Software: MS Windows-based DeviceInstaller, Com Port Redirector

XPC100100K-02 xPico Ethernet Development Kit (RS Part No. 783-2744)
XPC100100B-01 xPico Ethernet Module
DE9 serial port connector for RS-232/422/485 communication
DE9 serial port connector for RS-232 communication
RJ45 Ethernet connector and PoE port
miniUSB socket with UART-USB Bridge
On-board Power-over-Ethernet (PoE) regulator
System and Ethernet status LEDs
Header for access to all logic xPico pins
Reset pushbutton
Set Default pushbutton
Power switch
Powered from USB or Ethernet connection

Supplied with

Development kit includes: 3m RS-232 null-modem cable, 3m CAT5 Ethernet cable

Specificaties
Kenmerk Waarde
Interface Function Ethernet
Kit Classification Interface Board
Kit Name XPico
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 03-02-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
103,84
(excl. BTW)
125,65
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 103,84
Related Products
The RaspyPlay4 from MikroElektronika is an add-on board ...
Description:
The RaspyPlay4 from MikroElektronika is an add-on board for the Raspberry Pi. As the Pi proves to be the choice for multimedia projects, the RaspyPlay4 is perfect in helping your Pi to produce high-quality audio sound.Features & Benefits of the ...
This board is dedicated to receiving power with ...
Description:
This board is dedicated to receiving power with USB Type-C Power Delivery and requests the maximum voltage from the voltage profile (PDO) that the powersupply side has. If you want to check the operation of Power Delivery, please prepare power ...
The STEVAL-ISC004V1 evaluation board is a ready-to-use USB ...
Description:
The STEVAL-ISC004V1 evaluation board is a ready-to-use USB PD source based on STUSB4710A and ST1S14 ICs. It demonstrates how to convert a fixed voltage DC power input into a USB PD variable voltage output. The STUSB4710A acts as a Type-C ...
The MikroElektronika ProxFusion click board is a multifunctional ...
Description:
The MikroElektronika ProxFusion click board is a multifunctional capacitive and hall-effect sensor device. It has IQS624 which is a combined multi-sensor IC from Azoteq which includes hall-effect rotation sensing, along with dual channel capacitive proximity or touch sensing, or single-channel ...