Microchip, Projected Capacitive Touch Pad Development Kit, DM160219

  • RS-stocknr. 825-2502
  • Fabrikantnummer DM160219
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Projected Capacitive Touch Pad Development Kit, Microchip

The Projected Capacitive Touch Pad Development Kit enables designers to create interfaces with single finger gestures to swipe, scroll or double tap controls, integrating gestures and XY touch. Applications include wearable devices such as fitness wristbands, remote control touch pads, track pads and computer peripherals, gaming devices, security control keypads and input devices with configurable button, keypad or scrolling functions.-

0.7 Lexan™ cover layer
LED indicators
Up to 15 channels touch sensor support
Works with PCB, film, glass and FPC sensors

Supplied with

Touch Pad controller board (including the MTCH6102 controller), mini USB cable

Sensor Interfaces, Microchip

Specificaties
Kenmerk Waarde
Kit Classification Development Kit
Kit Name Projected Capacitive Touch Pad
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 04-05-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
45,80
(excl. BTW)
55,42
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 45,80
Related Products
High speed Serial-to-Ethernet gateway module with an RJ-45 ...
Description:
High speed Serial-to-Ethernet gateway module with an RJ-45 jackHigh stability and reliability Ethernet connection solution10/100Mbps Ethernet interface supported with full hardwired TCP/IP stack chip W5100Up to 230Kbps serial communication interfaceSerial configuration commands support: Simple command frame ...
Direct Connection to Serial Devices that Adds Network ...
Description:
Direct Connection to Serial Devices that Adds Network Function in a Simple and Quick way, and Provide Firmware CustomizationHigh stability & reliability by using W5100Easy & Powerful configuration programSupport 2 Serial PortsSupport DHCP, PPPoE and DNSSupport PPPoE Connection for ADSLSupport ...
The Vinculo is a dual channel USB Host/Device ...
Description:
The Vinculo is a dual channel USB Host/Device Controller is targeted at rapid development and prototyping of USB Host/Device interfaces. An optional Vinculo prototyping board provides add-on expansion board support. The Vinculo features an 8-channel, 10Bit ADC, PWM interface and ...
The EVAL-ADUSB2EBZ USBi device is a stand-alone communications ...
Description:
The EVAL-ADUSB2EBZ USBi device is a stand-alone communications interface, featuring USB-to-I²C and SPI conversion. It connects to a PC USB port and provides either I²C or SPI access to the evaluation board through a ribbon cable. It is compatible with ...