Microchip, 4-port USB Battery Charging Hub USB Evaluation Board, EVB-USB2534BC

  • RS-stocknr. 825-2537
  • Fabrikantnummer EVB-USB2534BC
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

EVB-USB2534BC-01 4-Port, USB 2.0 Hub Battery Charger Board, Microchip

EVB-USB2534BC-01 4-Port, USB 2.0 Hub Battery Charger Board is a space saving, 4-layer, RoHs compliant board for battery charging using the USB2534. Simple migration of USB2512B designs is possible due to pin compatibility of the USB2534 with the USB2514B and the board operates from a single voltage external power supply.

Supports custom configurations through the ProTouch and ProLink tools
Multi-transaction translator is enabled
Individual port over-current sensing
Individual port power control with LEDs for port power indication
Self-powered operation
EMI suppression provided by a selection of capacitors and inner power/ground PCB layers
Single crystal clock source

I/O Peripherals - Microchip

Specificaties
Kenmerk Waarde
Interface Function USB
Kit Classification Evaluation Board
Kit Name 4-port USB Battery Charging Hub
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 21-05-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
372,57
(excl. BTW)
450,81
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 372,57
Related Products
The Microchip EVB-LAN9252-HBI+ LAN9252 EtherCAT® Slave Controller (ESC) ...
Description:
The Microchip EVB-LAN9252-HBI+ LAN9252 EtherCAT® Slave Controller (ESC) Evaluation Kit is a development platform for you to explore the LAN9252 EtherCAT® IC. The board supports HBI/SPI+GPIO interfaces.The EVB-LAN9252-HBI+ features dual integrated Ethernet PHYs which each contain a full-duplex 100BASE-TX ...
The KSZ9567R is a highly-integrated, IEEE 802.3 compliant ...
Description:
The KSZ9567R is a highly-integrated, IEEE 802.3 compliant networking device that incorporates a layer-2 managed Gigabit Ethernet switch, five 10BASE-Te/100BASE-TX/1000BASE-T physical layer transceivers (PHYs) and associated MAC units, and two MAC ports with individually configurable RGMII/MII/RMII interfaces for ...
The LC234X module provides a low cost USB ...
Description:
The LC234X module provides a low cost USB to UART bridge using the FT234XD IC to transfer data at up to 3M Baud. Ideal for programming Arduino Pro, ESP modules etc., the pinouts follow the industry standard FTDI TTL cable ...
The UMFT240XA is a development module that converts ...
Description:
The UMFT240XA is a development module that converts USB to serial 8-Bit 245 FIFO data interfaceAsynchronous and Synchronous bit bang interface modes are availableSmall PCB assembly module designed to fit a standard 7.62mm (0.3”) wide 24-pin DIP socketOn board USB ...