ABB R600 Series 24V ac/dc DIN Rail Interface Relay Module, DPDT, Screw

  • RS-stocknr. 670-0034
  • Fabrikantnummer 1SNA645012R2500
  • Fabrikant ABB
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Interface Relay - R600 Series

ABB R600 series interface relays are used for electrical isolation, amplification and signal matching between a PLC, PC or field bus system and the sensor/actuator level. The compact design and different connection terminal possibilities optimise your panel installation.

Features and Benefits

Screw or spring type terminals Wide range of output options
Built in RC circuit
Leakage current protection on the input side
Available with visible or covered switch
Manual or automatic actuation
LED for the indication of the operational state

Specificaties
Kenmerk Waarde
Coil Voltage 24V ac/dc
Contact Configuration DPDT
Switching Current 8 A
Mounting Type DIN Rail
Terminal Type Screw
Length 70mm
Depth 12mm
Series R600
Height 75mm
Dimensions 70 x 12 x 75mm
Input Current 20mA
Minimum Operating Temperature -20°C
Maximum Operating Temperature +70°C
Operating Temperature Range -20 → +70°C
Turn On Time 6ms
Turn Off Time 10ms
24 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
112 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
33,30
(excl. BTW)
40,29
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 33,30
5 - 11
€ 32,28
12 +
€ 31,24
Related Products
Ideal interface for PLC and electronic systemsInstant ejection ...
Description:
Ideal interface for PLC and electronic systemsInstant ejection of relay using plastic retaining clipSupply status indication and coil suppression module as standard440Vac switching voltageWidth: 15.8mmContact material: AgNi.
PLC-RPT series relay modules consisting of terminal block ...
Description:
PLC-RPT series relay modules consisting of terminal block with push-in connection and plug-in miniature relay, for mounting on DIN rail. Efficient connection to system cabling using V8 adapterSafe isolation according to DIN EN 50178 between coil and contactFunctional plug-in bridgesOperating ...
DIN rail mounting, hermetically sealedPlug in jumpers to ...
Description:
DIN rail mounting, hermetically sealedPlug in jumpers to link common potentialsStatus LED and marking labelIntegrated diodes for coil suppression and polarity protectionContact rating 6A/250V acSwitching voltage 250 VacOperating temperature range 0 to +50°C.
15.8 mm wide relay interfaces, for assembly on ...
Description:
15.8 mm wide relay interfaces, for assembly on 35 mm DIN rail, ideal for PLC interfacing.Available in electro-mechanical version.Connection by spring terminals for fast wiring of the conductors.Supplied with voltage indicator lamp and coil protection.Extraction and retaining clip.