ABB PCB Mount Interface Relay Module, SPDT, Cage Clamp, Fork, Screw, 8A 16.8 → 61.2V dc

  • RS-stocknr. 775-5164
  • Fabrikantnummer 1SVR405651R3100
  • Fabrikant ABB
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Pluggable Interface Relays CR-P Series

The CR-P series of pluggable interface relays from ABB are standard PCB relays that can be used for electrical isolation, amplification and signal matching between the electronic controlling, e.g. PLC (programmable logic controller), PC or field bus systems and the sensor/actuator level. These interface relays do not use additional internal protective circuits and therefore are overload-proof against short-time variations like current or voltage peaks.

Output contacts: 1 C/O (16 A) or 2 C/O (8 A)
Cadmium-free contact material
Suited for logical and standard sockets
Width on socket: 15.5 mm

Specificaties
Kenmerk Waarde
Minimum Input Voltage 16.8V
Maximum Input Voltage 61.2V dc
Contact Configuration SPDT
Mounting Type PCB Mount
Load Current Rating 8A
Load Voltage Rating 250V
Terminal Type Cage Clamp, Fork, Screw
Length 12.7mm
Depth 29.0mm
Height 15.7mm
Dimensions 12.7 x 29.0 x 15.7mm
Contact Material Gold Plated
Input Voltage Range 16.8 → 61.2V dc
Minimum Operating Temperature -40°C
Control Resistance 0.1Ω
Turn Off Time 3ms
Operating Temperature Range -40 → +85°C
Maximum Operating Temperature +85°C
Input Resistance 1440Ω
Turn On Time 7ms
12 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
4,74
(excl. BTW)
5,74
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 4,74
5 - 11
€ 4,59
12 +
€ 4,47
Related Products
DIN rail mounting and only 6.2mm wideReplaceable relayJumper ...
Description:
DIN rail mounting and only 6.2mm wideReplaceable relayJumper combStatus LEDMarking facilityAvailable as high load silver contacts '0' and Gold Flashed low current '1'
15.8 mm wide relay interfaces, for assembly on ...
Description:
15.8 mm wide relay interfaces, for assembly on 35 mm DIN rail, ideal for PLC interfacing.Available in electro-mechanical version.Connection by spring terminals for fast wiring of the conductors.Supplied with voltage indicator lamp and coil protection.Extraction and retaining clip.
ABB R600 series interface relays are used for ...
Description:
ABB R600 series interface relays are used for electrical isolation, amplification and signal matching between a PLC, PC or field bus system and the sensor/actuator level. The compact design and different connection terminal possibilities optimise your panel installation. Screw or ...
A range of Schneider Electric interface relays from ...
Description:
A range of Schneider Electric interface relays from the Zelio series. These plug in Relays are suitable for standard applications. Simple installation and operationContacts material silver alloy (Ag/Ni)DC or AC coilOperating temperature -40 → 70 °CIngress protection IP40.