Siemens Inverter Drive, 1-Phase In, 0 → 550Hz Out 0.55 kW, 230 V ac, 7.7 A SINAMICS G110, IP20

  • RS-stocknr. 505-2006
  • Fabrikantnummer 6SL3211-0AB15-5UA1
  • Fabrikant Siemens
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

SINAMICS G110 Frequency Inverter Single Phase without Filter

Features and benefits

SINAMICS G110 is a frequency inverter with basic functionality for operating 3-phase motors in 1-phase networks Characterised by ease of use
Very compact devices
Capacity range 0.12 → 3 kW
Improved brake functionality
Without filter
Simple cable connection as with circuit breakers
Pluggable optional basic operator panel (BOP)
Simple guided start-up
Copy function via operating panel
Parametrisable U/F curve
3 parametrisable digital inputs, 2-wire/3-wire control possible
1 analogue input (0 → 10 V), can be used as a fourth digital input
1 parametrisable optocoupler output
3 programmable fixed frequencies
Integrated protection functions

Siemens Sinamics G110 Range

The Sinamics family of drives is aimed at users who do not require vast arrays of control functions to undertake the required control application.,The G110 is a versatile inverter which operates a 3 phase motor, while being powered by a single phase supply.

Installation and commissioning is fast and uncomplicated
Time saving parameter cloning using the optional Basic Operator Panel
Contactor style power terminal layout
Configurable voltage boost for higher dynamic response when starting and accelerating
Fast braking without external brake resistor
Auto restart facility following a power failure or operating fault
Integral EMC filter
Easy DIP switch selection of mains input frequency 50 or 60Hz
In-built protection functions include under or over voltage, earth fault, short circuit, stall prevention, drive and motor over-temperature protection
IP20 protection rating
3 programmable digit inputs, 1 analogue (0-10V)
Designed for the world market
Typical applications: conveyors, pumps, doors, barriers

Specificaties
Kenmerk Waarde
Power Rating 0.55 kW
Phase 1
Supply Voltage 230 V ac
Current Rating 7.7 A
Output Frequency 0 → 550Hz
Ambient Temperature -10 → +40°C
Overall Width 90mm
Overall Length 150mm
Overall Depth 131mm
IP Rating IP20
Series SINAMICS G110
5 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
145,80
(excl. BTW)
176,42
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 145,80
Related Products
The Control Techniques 1-phase inverter drive has 3.3A ...
Description:
The Control Techniques 1-phase inverter drive has 3.3A current with 0.55kW power belongs to the M200 series. This product is available with vector control drive technique. • Ambient temperature ranges between -20°C and 40°C• Compact size• Control panel with digital ...
Unidrive M200 connects with many of the common ...
Description:
Unidrive M200 connects with many of the common field buses using the modular ’SI’ interface port. It can communicate with SI-Ethernet, SI-EtherCAT, SI-PROFINET, SI-PROFIBUS, SI-CAN open and SI-DeviceNet. The RFC-A mode means you’ll benefit from consistent running speeds, at current ...
Note: An operator panel will be required to ...
Description:
Note: An operator panel will be required to operate this unit or to modify the factory set parameters. Micro processor controlled, using IGBT technology Simple to commission & set up Works straight from the box, using factory set defaults. To ...
The 400 series family is the next step ...
Description:
The 400 series family is the next step in the evolution of the Micromaster inverter range. It builds on the success of the previous versions, which made it a global favourite for motor control. 3 freely programmable, isolated digital inputsOne ...