Calex PC151MT-0WJ mA Output Signal Infrared Temperature Sensor, 1m Cable, 0°C to +250°C

  • RS-stocknr. 553-311
  • Fabrikantnummer PC151MT-0WJ
  • Fabrikant Calex
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

High Performance PyroCouple Series

High quality, low cost, non-contact Infra-red temperature sensors suitable for measuring the temperature of inaccessible or moving objects and materials.

Fast response with high stability Types available with air/water cooled housings
Quick and easy to install
Available as either two-wire or four-wire units
240 ms to 90% response time
Stainless steel housing
M16 x 1 mm mounting thread
Prewired 1 m cable connection
6 V dc minimum sensor voltage
0.95 emissivity
Temperature change varies by model

Two-wire sensors transmit the target temperature as a 4-20 mA output and offer a simple solution for most non-contact temperature measurement applications.

Four-wire sensors transmit the target temperature as a 0-50 mV or thermocouple output, and in addition transmit the internal temperature as a 4-20 mA output. This second output can be used to ensure that the sensor is being operated within the correct ambient temperature limits and prevent damage caused by overheating or overcooling. It can also be used to give an approximate indication of the air temperature surrounding the sensor.

Specificaties
Kenmerk Waarde
Sensor Type MA Output Signal
Response Time 240 ms
Accuracy 1 %
Cable Length 1m
Minimum Temperature Sensed 0°C
Output Type Analogue
Maximum Temperature Sensed +250°C
Diameter 16 mm
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
454,95
(excl. BTW)
550,49
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 454,95
Related Products
BCS capacitive sensors monitor and detect stack heights ...
Description:
BCS capacitive sensors monitor and detect stack heights and levels as well as the presence of objects and content in glass, plastic or paper packages all with extreme precision. The BCS range are unaffected by dust, surface reflections or any ...
BCS capacitive sensors monitor and detect stack heights ...
Description:
BCS capacitive sensors monitor and detect stack heights and levels as well as the presence of objects and content in glass, plastic or paper packages all with extreme precision. The BCS range are unaffected by dust, surface reflections or any ...
3-wire flush mounting, stainless steel bodied sensors, protected ...
Description:
3-wire flush mounting, stainless steel bodied sensors, protected to IP67 with an operating temperature range of –25 to +75°C. All have short circuit and reverse polarity protection and provide an LED indication of the on/off status. Inductive detectors with a ...
Flexible placement with slim cylindrical shape and long ...
Description:
Flexible placement with slim cylindrical shape and long focus with a distance of 500 mm and area diameter of 80 mm. Wide measurement range of 0 to 400º. Body and lens resist ambient operating temperatures upt to 70ºFast measurement with ...