Joystick Control Knob for Joystick

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Sub-miniature Force Operated Joystick (Model 462)

This compact, two axis, force operated, precision joystick can be used for fingertip or thumb control and converts the input force of the operator to analogue output voltages, proportional to the applied force and input voltage. It incorporates piezo-resistive technology, first patented and used in joystick technology, by Ultra MSI (U.S. Patent No. 3454920)

One of the smallest force type precision joysticks available, with a weight of only 11g
Ideal where high precision control is required and where space is limited
Infinite resolution, easy and natural to operate and high reliability (100,000 Hours MTBF)
Epoxy sealed construction capable of sealing to IP67
Performs without loss of precision, throughout operational life
Easy to integrate into instrument panels or for thumb operation in handgrips
Ideal for computer cursor controls, robotics, medical or scanning equipment, security cameras and vehicle industrial equipment control
When affixing control knobs to joysticks, use 0.035 hex key (see stock no 609-708). Loctite 222 is also recommended to lock threads on screws (see stock no 514-509)

Note

Supplied with 9.4mm dia by 32.5mm long handle

Specificaties
Kenmerk Waarde
Accessory Type Knob
For Use With Joystick
8 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
53,23
(excl. BTW)
64,41
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 53,23
Related Products
Optional handle which can be fitted to a ...
Description:
Optional handle which can be fitted to a 140M circuit breaker to enable it to be locked in the ’off’ position with a single padlock or up to 3 padlocks using the lock attachment (see stock no 351-5785).
From Bourns, the H-23 series compact 15-Turn 22.2mm ...
Description:
From Bourns, the H-23 series compact 15-Turn 22.2mm diameter counting dial is designed for use with precision potentiometers or other rotating devices / panel controls where a turns-indicating device or an adjustment setting/locking device is needed. • Up to 15 ...
Black thumb-grip handle and silver escutcheon plateConform to ...
Description:
Black thumb-grip handle and silver escutcheon plateConform to IEC947/EN 60947Maximum panel thickness 5mm48 x 48mm switch front plateFinger-proof terminalsIP65 for flush mounting three- hole mounting and IP55 for 22.5mm hole mounting (supplied with adaptor for single 22.5mm hole mounting)Operating current: ...
Black thumb-grip handle and silver escutcheon plateConform to ...
Description:
Black thumb-grip handle and silver escutcheon plateConform to IEC947/EN 60947Maximum panel thickness 5mm48 x 48mm switch front plateFinger-proof terminalsIP65 for flush mounting three- hole mounting and IP55 for 22.5mm hole mounting (supplied with adaptor for single 22.5mm hole mounting)Operating current: ...