IP65, IP68 Hall Effect Joystick, 3 axes, 10 mA @ 5 V ac 4.75V, -25 → +70°C

  • RS-stocknr. 693-2332
  • Fabrikantnummer HFX-45S12
  • Fabrikant Apem
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Three Axis Hall Effect Joystick

Self-centering three axis joystick using hall effect non-contacting technology

This 3 axis joystick gives control over the X, Y and Z axis. The handle also incorporates two push buttons. It is fitted with a square limiter giving full control of the X and Y axis with 36° overall travel, 18° in each direction from centre. The handle rotates, controlling the Z axis and has a mechanical travel totalling 60°, or 30° travel in each direction from the centre position. This unit has an output of 0.25 V to 4.754 V.

Panel Mounting

This joystick is designed for drop-in panel mounting. It requires a panel cut out of 41.66 mm with the supplied gasket being placed above the panel. The joystick is then placed over the gasket and through the panel. It is then held in place by four retaining screws. The gasket and boot provide an IP65 above panel seal.

Specificaties
Kenmerk Waarde
Number of Axes 3
Switch Technology Hall Effect
IP Rating IP65, IP68
Handle Type Button
Contact Voltage Rating 4.75V
Contact Current Rating 10 mA @ 5 V ac
Joystick Travel 36 °
Mechanical Life 3000000Cycles
Depth Behind Panel 32.77mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +70°C
Operating Temperature Range -25 → +70°C
9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
28 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
270,71
(excl. BTW)
327,56
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 270,71
10 - 24
€ 238,23
25 - 49
€ 231,08
50 +
€ 222,23
Related Products
Single axis Hall Effect slider modules from Suregrip ...
Description:
Single axis Hall Effect slider modules from Suregrip available in three configurations: Friction maintained, proportional (spring return to centre) and detented (on-off-on).The friction maintained version is suitable for throttle control or general machine speed control. The proportional version is designed ...
The CH Products BF/BD series of paddle controllers ...
Description:
The CH Products BF/BD series of paddle controllers are high precision, contactless controls combining the features of a contactless single axis joystick and a switch. The BF/BD series paddle controllers feature the Hall effect within an innovative design and ergonomic ...
The TS Series Thumb Stick is a proportional ...
Description:
The TS Series Thumb Stick is a proportional two axes joystick in a miniature package. Featuring non-contacting Hall Effect technology for long life performance, the TS Series Thumb Stick is available with multiple linear output options including single and dual ...
The JHT Miniature Joystick series from OTTO are ...
Description:
The JHT Miniature Joystick series from OTTO are ideal in applications with limited space and where precision control is required. The robust construction coupled with the fitted half or full boot has been tested to five million cycles with no ...