Fluorescent T8/T12 Lamp Holder Snap-Fit - 26.422.1113.50

  • RS-stocknr. 561-943
  • Fabrikantnummer 26.422.1113.50
  • Fabrikant BJB
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

T8/T12 Snap-Fit, Back Mount

Snap in pins with spring
Lamp base T8 / T12
T-Marking 130
Wiring: through the body
Max temperature at air pass rotor: 130°C
Max temperature at rear: 110C
Material: PC

T8/T12 Snap-Fit, Back Mount Lamp Holder

Our range of fluorescent lighting components provides replacements and solutions to ensure that fittings can be repaired or replaced with ease. These T8/T12 fixing brackets are designed for end-mounting lamp holders and made of polycarbonate with through the body wiring. Making them ideal components to make up custom built assemblies as this sprung snap fit lamp holder, provides a lamp length tolerance compensation of 2 mm.

Product Application Information

Suited to almost all lighting schemes installed in commercial and industrial premises. Ideal for custom built assemblies using T12 and T8 standard fluorescents, circular fluorescents and 2D lamps.

Specificaties
Kenmerk Waarde
Supported Lamp Type Fluorescent
Base G13
Lamp Size T8/T12
Material PC
Fixing Method Snap-Fit
Number of Pins 2
Wattage 660 W
Wiring Points Bottom
Length 24.8 mm
Width 13 mm
Wiring Type Push-Wire
290 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
6190 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
0,893
(excl. BTW)
1,081
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 +
€ 0,893
€ 8,93
*prijsindicatie
Related Products
These Enclosure light fittings have a very long ...
Description:
These Enclosure light fittings have a very long service life, thanks to the use of LED technology. LED light fittings are the ideal upgrade of conventional lighting, providing an economical replacement, with great energy savings and very low maintenance costs. ...
This metal halide lampholder is designed for use ...
Description:
This metal halide lampholder is designed for use with a R7s fittingRated at 150W, 1000V, 5KV pulse-rated, the holder will accept a starting voltage up to 4·5kV.
A dichroic spring clip base lamp holder for ...
Description:
A dichroic spring clip base lamp holder for GU5-3 lamps. This halogen lamp holder has specially designed entry holes to make it easier to insert your lamp and will also accommodate common G6.5 lamp fittings. These lamp holders are easy ...
Spring fittings for halogen tungsten bulbs.Aluminium body, insulating ...
Description:
Spring fittings for halogen tungsten bulbs.Aluminium body, insulating section in steatite, stainless steel coil spring.Available in screw version (5100 / SIV) or bracket version for panel mounting using M4 screws(5100 / SQ80).To ensure the correct operation of contacts, the two ...