Pramet Indexable Lathe Tool Insert, 3.97mm x 9.7mm, Grade T9325

  • RS-stocknr. 866-0433
  • Fabrikantnummer CCMT 09T308E-FM:T9325
  • Fabrikant Pramet
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CZ
Productomschrijving

Pramet CCMT Insert

CVD Coated Insert for general internal turning operations. Positive geometry for low depths of cut and finishing applications. For use with SCAC, SCBC, SCDC, SCFC, SCLC and SCXC Holders and Bars.

T8330

Excellent for machining Steel, Stainless Steel and Cast Iron
Acceptable for Super Alloys

T9325

Excellent for machining Steel and Stainless Steel
Acceptable for Cast Iron

T9315

Excellent for machining Steel
Acceptable for Cast Iron and Hardened Steels

Turning Inserts

Breakdown of ISO Reference

Higher Number = Tougher / Resistant to Impact
Lower Number = Harder / Wear Resistant

TU5525 the New Universal Turning Grade

TU5525 is a truly universal tuning grade suitable for cutting Steel, Stainless Steel, Cast Iron and heat resistant Aaloys. There is no need to hold stock of a multitude of grades reducing the cost of inventory and time wasted changing inserts. One insert for almost all applications.

TP2135 a Tough Impact Resistant Grade

If insert breakage or chipping of the cutting edge is a problem TP2135 may be the answer. Some application do not offer the cutting edge a constant cutting surface whether from a non round part or holes in the part this constant impact on the cutting edge can lead to insert failing. TP2135 is designed to take higher impact loads giving a more secure cutting edge, suitable for cutting steel, stainless steel and heat resistant alloys.

ISO Reference
ISO REF: SCLCR2525M12
 
T= Shape N= Clearance Angle M= Tolerances G= Type 16= Cutting Edge Length
04= Thickness 04= Corner Radius E= Cutting Edge R= Cutting Direction
Specificaties
Kenmerk Waarde
Type Indexable
Shape Diamond
Bore Diameter 4.5mm
Length 9.7mm
Grade T9325
Height 3.97mm
2 op voorraad - levertijd is 1 werkdag(en).
Prijs 1 Box of 10
97,00
(excl. BTW)
117,37
(incl. BTW)
Box(es)
Per doos
Per stuk*
1 +
€ 97,00
€ 9,70
*prijsindicatie
Related Products
High speed steel alloyed with 9.7% molybdenum and ...
Description:
High speed steel alloyed with 9.7% molybdenum and 8.3% cobaltHigher performance than standard HSS tool steelIdeal for machining abrasive materials or material which tends to work harden.
TCMT inserts provide 3 cutting edges for improved ...
Description:
TCMT inserts provide 3 cutting edges for improved economy. Suitable for chamfering in a wide range of materials. Higher Number = Tougher / Resistant to ImpactLower Number = Harder / Wear Resistant.
For use with DCLN, PCBN, PCKN and PCLN ...
Description:
For use with DCLN, PCBN, PCKN and PCLN Holders & Bars. Excellent for machining SteelAcceptable for Cast Iron and Hardened Steels.
For use with DDJN, PDJN, PDNN, PDXN and ...
Description:
For use with DDJN, PDJN, PDNN, PDXN and PDUN Holders & Bars. Excellent for machining SteelAcceptable for Cast Iron and Hardened Steels.