Pramet Indexable Lathe Tool Insert, 4.76mm x 16.5mm, Grade T9325

  • RS-stocknr. 866-0506
  • Fabrikantnummer TNMG 160404E-M:T9325
  • Fabrikant Pramet
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CZ
Productomschrijving

Pramet TNMG Insert

TNMG Negative Turning Insert for use with DTGN, DTFN, PTFN, PTGN, PTTN, PTFN and MTJN Holders and Bars.

T9315

Excellent for machining Steel
Acceptable for Cast Iron and Hardened Steels

T9325

Excellent for machining Steel and Stainless Steel
Acceptable for Cast Iron

T9335

Excellent for machining Steel
Acceptable for Stainless Steel

Turning Inserts

Breakdown of ISO Reference

Higher Number = Tougher / Resistant to Impact
Lower Number = Harder / Wear Resistant

TU5525 the New Universal Turning Grade

TU5525 is a truly universal tuning grade suitable for cutting Steel, Stainless Steel, Cast Iron and heat resistant Aaloys. There is no need to hold stock of a multitude of grades reducing the cost of inventory and time wasted changing inserts. One insert for almost all applications.

TP2135 a Tough Impact Resistant Grade

If insert breakage or chipping of the cutting edge is a problem TP2135 may be the answer. Some application do not offer the cutting edge a constant cutting surface whether from a non round part or holes in the part this constant impact on the cutting edge can lead to insert failing. TP2135 is designed to take higher impact loads giving a more secure cutting edge, suitable for cutting steel, stainless steel and heat resistant alloys.

ISO Reference
ISO REF: SCLCR2525M12
 
T= Shape N= Clearance Angle M= Tolerances G= Type 16= Cutting Edge Length
04= Thickness 04= Corner Radius E= Cutting Edge R= Cutting Direction
Specificaties
Kenmerk Waarde
Type Indexable
Shape Triangular
Bore Diameter 3.81mm
Length 16.5mm
Grade T9325
Height 4.76mm
4 op voorraad - levertijd is 1 werkdag(en).
Prijs 1 Box of 10
106,70
(excl. BTW)
129,11
(incl. BTW)
Box(es)
Per doos
Per stuk*
1 +
€ 106,70
€ 10,67
*prijsindicatie
Related Products
Lathe tools manufactured from high-speed steel 5% molybdenumIdeal ...
Description:
Lathe tools manufactured from high-speed steel 5% molybdenumIdeal for production of a standard general purpose tooling with excellent cutting properties for general workshop useAvailable in various shape and lengthSquare tool steel has a pre-ground rake angle.
Boring Bar for TPMR inserts. For general internal ...
Description:
Boring Bar for TPMR inserts. For general internal turning operationsAlso available in left hand.
TCMT inserts provide 3 cutting edges for improved ...
Description:
TCMT inserts provide 3 cutting edges for improved economy. Suitable for chamfering in a wide range of materials. Higher Number = Tougher / Resistant to ImpactLower Number = Harder / Wear Resistant.
For use with DCLN, PCBN, PCKN and PCLN ...
Description:
For use with DCLN, PCBN, PCKN and PCLN Holders & Bars. Excellent for machining SteelAcceptable for Cast Iron and Hardened Steels.