- RS-stocknr.:
- 902-8603
- Fabrikantnummer:
- SK-28PTU
- Fabrikant:
- 4D Systems
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Alternatief
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.
- RS-stocknr.:
- 902-8603
- Fabrikantnummer:
- SK-28PTU
- Fabrikant:
- 4D Systems
Wetgeving en compliance
- Land van herkomst:
- PH
Productomschrijving
Resistive Touch LCD Starter Kits with PICASO Processor, 4D Systems
4D Systems range of resistive touch Starter Kits with PICASO processor are available in three sizes: 2.4 inch, 2.8 inch and 3.2 inch. The embedded PICASO graphics controller is driven by Extensible Virtual Engine (EVE) and benefits from features such as full colour image, animation, icon and video display. You also have access to Workshop4 IDE for software development and coding using the 4DGL graphics language.
Features & Benefits:
2.4 inch LCD Starter Kit — 9028593
Dimensions: 45 mm x 63 mm x 16 mm
Viewing area: 36.72 mm x 48.96 mm
240 x 320 pixel resolution
13 GPIO pins
Up to 65k colours
4-Wire resistive touch panel
14 KB flash memory
14 KB SRAM
2 asynchronous hardware serial ports
I2C serial interface
8 x 16-bit timers
microSD memory card socket
FAT16 DOS compatible file access
Lithium polymer battery support
PWM audio pin
Audio amplifier
30-pin header for I/O expansion and daughter board plug-in
Suitable for a 4 V to 5.5 V power supply
4 corner plates with 2.7 mm holes for mounting
2.8 inch LCD Starter Kit — 9028603
Dimensions: 52.1 mm x 72 mm x 16 mm
Viewing area: 43.2 mm x 57.6 mm
240 x 320 pixel resolution
13 GPIO pins
Up to 65k colours
4-Wire resistive touch panel
14 KB flash memory
14 KB SRAM
2 asynchronous hardware serial ports
I2C serial interface
8 x 16-bit timers
microSD memory card socket
FAT16 DOS compatible file access
Lithium polymer battery support
PWM audio pin
Audio amplifier
30-pin header for I/O expansion and daughter board plug-in
Suitable for a 4 V to 5.5 V power supply
4 corner plates with 2.7 mm holes for mounting
3.2 inch LCD Starter Kit — 9028606
Dimensions: 56.3 mm x 80.5 mm x 15.9 mm
Viewing area: 48.60 x 64.80 mm
240 x 320 pixel resolution
13 GPIO pins
Up to 65k colours
4-Wire resistive touch panel
14 KB flash memory
14 KB SRAM
2 asynchronous hardware serial ports
I2C serial interface
8 x 16-bit timers
microSD memory card socket
FAT16 DOS compatible file access
Lithium polymer battery support
PWM audio pin
Audio amplifier
30-pin header for I/O expansion and daughter board plug-in
Suitable for a 4 V to 5.5 V power supply
4 corner plates with 2.7 mm holes for mounting
Kit Contents:
Each starter kit contains a resistive touch LCD module, a 2GB microSD card, a uUSB-PA5 programming adaptor, 150 mm 5 way female-to-female jumper cable, 5 way male-to-male adaptor and a quick start user guide.
Features & Benefits:
2.4 inch LCD Starter Kit — 9028593
Dimensions: 45 mm x 63 mm x 16 mm
Viewing area: 36.72 mm x 48.96 mm
240 x 320 pixel resolution
13 GPIO pins
Up to 65k colours
4-Wire resistive touch panel
14 KB flash memory
14 KB SRAM
2 asynchronous hardware serial ports
I2C serial interface
8 x 16-bit timers
microSD memory card socket
FAT16 DOS compatible file access
Lithium polymer battery support
PWM audio pin
Audio amplifier
30-pin header for I/O expansion and daughter board plug-in
Suitable for a 4 V to 5.5 V power supply
4 corner plates with 2.7 mm holes for mounting
2.8 inch LCD Starter Kit — 9028603
Dimensions: 52.1 mm x 72 mm x 16 mm
Viewing area: 43.2 mm x 57.6 mm
240 x 320 pixel resolution
13 GPIO pins
Up to 65k colours
4-Wire resistive touch panel
14 KB flash memory
14 KB SRAM
2 asynchronous hardware serial ports
I2C serial interface
8 x 16-bit timers
microSD memory card socket
FAT16 DOS compatible file access
Lithium polymer battery support
PWM audio pin
Audio amplifier
30-pin header for I/O expansion and daughter board plug-in
Suitable for a 4 V to 5.5 V power supply
4 corner plates with 2.7 mm holes for mounting
3.2 inch LCD Starter Kit — 9028606
Dimensions: 56.3 mm x 80.5 mm x 15.9 mm
Viewing area: 48.60 x 64.80 mm
240 x 320 pixel resolution
13 GPIO pins
Up to 65k colours
4-Wire resistive touch panel
14 KB flash memory
14 KB SRAM
2 asynchronous hardware serial ports
I2C serial interface
8 x 16-bit timers
microSD memory card socket
FAT16 DOS compatible file access
Lithium polymer battery support
PWM audio pin
Audio amplifier
30-pin header for I/O expansion and daughter board plug-in
Suitable for a 4 V to 5.5 V power supply
4 corner plates with 2.7 mm holes for mounting
Kit Contents:
Each starter kit contains a resistive touch LCD module, a 2GB microSD card, a uUSB-PA5 programming adaptor, 150 mm 5 way female-to-female jumper cable, 5 way male-to-male adaptor and a quick start user guide.
Note
4D Systems LCD Touchscreens
Specificaties
Kenmerk | Waarde |
---|---|
Diagonal Display Size | 2.8in |
Resolution | 240 x 320 pixels |
Touch Screen | Yes |
Touch Screen Type | Resistive |
Display Mode | Transmissive |
Display Matrix Technology | TFT |
Number of Colours | 65,536 |