- RS-stocknr.:
- 902-8612
- Fabrikantnummer:
- SK-43DCT
- Fabrikant:
- 4D Systems
1 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk
€ 216,59
(excl. BTW)
€ 262,07
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 216,59 |
- RS-stocknr.:
- 902-8612
- Fabrikantnummer:
- SK-43DCT
- Fabrikant:
- 4D Systems
Wetgeving en compliance
- Land van herkomst:
- PH
Productomschrijving
Capacitive Touch LCD Starter Kit with DIABLO16 processor, 4D Systems
The SK-43DCT 4.3 inch Capacitive Touch LCD Starter Kit from 4D Systems features an on-board DIABLO16 graphics controller. The DIABLO16 is driven by Extensible Virtual Engine (EVE) and benefits from features such as full colour image, animation, icon and video display. You also have access to Workshop4 IDE for software development and coding using the 4DGL graphics language.
Features & Benefits of the 4.3 inch Capacitive Touch LCD Starter Kit
Dimensions: 119.5 mm x 67 mm x 15.2 mm
Viewing area: 95.04 mm x 53.85 mm
480 x 272 pixel resolution
16 GPIO pins
Up to 65k colours
4-Wire resistive touch panel
6 banks of 32750 bytes of flash memory
32 KB SRAM
microSD memory card socket
FAT16 DOS compatible file access
PWM audio pin
Suitable for a 4 V to 5.5 V power supply
4 corner plates with 2.7 mm holes for mounting
Kit Contents:
Each starter kit contains a resistive touch LCD module, a 2GB microSD card, a uUSB-PA5 programming adaptor, 150 mm 5 way female-to-female jumper cable, 5 way male-to-male adaptor and a quick start user guide.
Features & Benefits of the 4.3 inch Capacitive Touch LCD Starter Kit
Dimensions: 119.5 mm x 67 mm x 15.2 mm
Viewing area: 95.04 mm x 53.85 mm
480 x 272 pixel resolution
16 GPIO pins
Up to 65k colours
4-Wire resistive touch panel
6 banks of 32750 bytes of flash memory
32 KB SRAM
microSD memory card socket
FAT16 DOS compatible file access
PWM audio pin
Suitable for a 4 V to 5.5 V power supply
4 corner plates with 2.7 mm holes for mounting
Kit Contents:
Each starter kit contains a resistive touch LCD module, a 2GB microSD card, a uUSB-PA5 programming adaptor, 150 mm 5 way female-to-female jumper cable, 5 way male-to-male adaptor and a quick start user guide.
Note
For new designs the 4D Systems gen4 range of LCD displays should be considered, including:
gen4-uLCD-43DT (RS part 1257947)
gen4-uLCD-43DT (RS part 1257947)
4D Systems LCD Touchscreens
Specificaties
Kenmerk | Waarde |
---|---|
Diagonal Display Size | 4.3in |
Resolution | 480 x 272pixels |
Touch Screen | Yes |
Touch Screen Type | Resistive |
Display Mode | Transmissive |
Display Matrix Technology | TFT |
Number of Colours | 65,536 |