BU9799KV-E2, LCD Driver 200-Segments, 2.5 → 5.5 V, 64-Pin VQFP

  • RS-stocknr. 185-0965
  • Fabrikantnummer BU9799KV-E2
  • Fabrikant ROHM
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

BU9799KV is a 1/4 duty general-purpose LCD driver that can be used for consumer / battery operated products and can drive up to 200 LCD Segments.It has integrated display RAM for reducing CPU load. Also, it is designed with low power consumption and no external component needed. It can support LCD contrast adjustment by its EVR function.

1/4duty driving: Max 200 segments
Integrated display data RAM: 50 x 4bit
1/3 or 1/2 bias setting selectable
Power supply for Interface: 2.5V to 5.5V
Power supply for LCD: 2.5V to 5.5V
Integrated LCD voltage driving circuit
Integrated oscillation circuit for LCD frame frequency
Line or Frame inversion driving selectable
Support 2 wire serial interface
Support INHb terminal to control Display ON/OFF
Integrated EVR function to adjust LCD contrast
Integrated power on reset circuit
No external components required
Low power consumption design

Specificaties
Kenmerk Waarde
Number of Segments 200
Maximum Clock Frequency 104Hz
Maximum Supply Current 20 μA
Mounting Type Surface Mount
Package Type VQFP
Pin Count 64
Typical Operating Supply Voltage 2.5 → 5.5 V
Dimensions 10 x 10 x 1.4mm
Height 1.4mm
Width 10mm
Length 10mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
Op voorraad - levertijd 4 à 5 werkdagen.
Prijs Each (On a Reel of 1000)
0,638
(excl. BTW)
0,772
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
1000 +
€ 0,638
€ 638,00
*prijsindicatie
Related Products
The Microchip Technology MIC2876 series is a surface ...
Description:
The Microchip Technology MIC2876 series is a surface mount, 8-pin, UDFN packaged buck-boost regulator. This operates in bypass mode automatically, when the input voltage is greater than the target output voltage. It has an input voltage rating from 2.5V to ...
The MIC4830 is a low noise 180VPP electroluminescent ...
Description:
The MIC4830 is a low noise 180VPP electroluminescent (EL) lamp driver. Using advanced Bipolar, CMOS, DMOS (BCD) technology, the MIC4830 integrates a high voltage boost converter and an H-bridge driver for driving a large EL lamp. The MIC4830 can drive ...
Improved 2nd Source! Directly Drives Four Digit, 7 ...
Description:
Improved 2nd Source! Directly Drives Four Digit, 7 Segment DisplaysICM7211 - Non-multiplexed Liquid Crystal Display (LCD)ICM7212 - Non-mulitplexed Common Anode LEDMulitplexed BCD Interface and μP Interface Versions No external components neededLow Power CMOS - 25μW typ. (display blanked) ApplicationsDigital Panel ...
The MAX3471EUA+T is a differential transceiver made typically ...
Description:
The MAX3471EUA+T is a differential transceiver made typically for battery powered RS-485/RS-422 systems but other applications include remote power reading & level translators. The MAX3471EUA+T is a half-duplex transceiver with the receiver enabled and the driver disabled. With a supply ...