Molex LED Mount for Lumileds LUXEON, Similar LUXEON COB Arrays 50 x 6.7mm

  • RS-stocknr. 903-4658
  • Fabrikantnummer 180555-1054
  • Fabrikant Molex
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Molex SlimRay™ Pre-Wired LED Array Holders for Lumileds LUXEON

SlimRay™ pre-wired LED array holders with a low profile stepped design for use with Lumileds LUXEON and similar next generation COB arrays. These SlimRay™ LED array holders feature pre-wired high pressure gold plated crimped terminals that eliminate the need for hand soldering and resultant damage to the COB during the process and a robust reflective white thermoplastic connector housing to promote light output. Additonal features of these SlimRay™ LED array holders include an LED Chip-on-Board (COB) pre-hold feature that allows the LED array to be fitted to the holder during final assembly, a flat-top surface with integrated bevel that surrounds the LES that provides seating for the optics and aids light output and a simple screw mount attachment for securing to a heatsink. Typical applications for these SlimRay™ pre-wired Lumileds LUXEON LED array holders include general illumination eg downlighting and spotlighting and area lighting eg roadways and carparks

Specificaties
Kenmerk Waarde
For Use With Lumileds LUXEON, Similar LUXEON COB Arrays
Dimensions 50 x 6.7mm
Length 50mm
Width 6.7mm
668 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
3,83
(excl. BTW)
4,63
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 3,83
Related Products
A range of low profile 1.27 mm Pitch ...
Description:
A range of low profile 1.27 mm Pitch Picoflex Headers for use with 90327 Series housings, see stock number 324-8047 typical. Fitted with friction lock, polarisation and stamped contacts with in-line flat tabsRigid solder tails require 0.8mm hole.
Quickie series 2.54 mm ejector header connectors that ...
Description:
Quickie series 2.54 mm ejector header connectors that mate with the Quickie IDC receptacle connectors. These Quickie ejector headers have four wall shrouding which provides protection the unmated pins. The shrouded housing also incorporates dual polarization slots and keying features ...
Convenio is a range of products that create ...
Description:
Convenio is a range of products that create a modular lighting system covering most of spot, linear and area lighting applicationsUnified electrical and mechanical interface allows the customer to create a variety of lighting schemesContemporary and minimalist ultra slim designSeamless ...
Slimline and low profile - 10x6x5.65 mmGull wing ...
Description:
Slimline and low profile - 10x6x5.65 mmGull wing SMT legsBifurcated contacts, gold platedHermetically sealed (RT V), IP67High mechanical shock resistance up to 300G functional, 500G survivalInsulation resistance at 500Vdc >109ΩHigh surge capability - meets Telcordia TR-NWT-001089 (2 / 10 μs) ...