TE Connectivity 2306129-1 LED Lens Cap Light Controller Base

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

TE Connectivity (TE)’s ANSI 136.41 compliant 76 mm and 81 mm diameter photo control base assemblies with sleeves and covers in varying heights, providing a total power and signal interface between the photo control and dimming receptacle. This interface can be used in applications such as LED outdoor roadway, street and area lighting fixtures. The base assembly solution includes power twist lock terminals, spring leaf signal terminals and a separately packaged foam gasket.

Translucent covers are configured to transmit daylight to the light sensing device
IP66 rated
UL 94 flammability rating with a 5V A rated cover
Sleeves are designed with side or topside aperture openings to accommodate directional light sensing devices

Specificaties
Kenmerk Waarde
For Use With Light Controller Base
Height 130mm
9 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
8,44
(excl. BTW)
10,21
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 8,44
10 - 24
€ 7,49
25 +
€ 6,75
Related Products
This Knightsbridge Chrome bezel is suitable for use ...
Description:
This Knightsbridge Chrome bezel is suitable for use with the BT14 range. With a polished chrome, finish this bezel adds a subtle touch to the bulkhead, making it look stylish and modern. Made from Polycarbonate makes this bezel robust. • ...
The Clips and Rings range of LED mounts, ...
Description:
The Clips and Rings range of LED mounts, from Bivar, are for through hole LEDs. They are designed for coupling into LED arrays. This group of mounts act as lead forming fixtures and align and elevate the LEDs for uniformity. ...
Osram LED PIN GY6.35 is a low voltage ...
Description:
Osram LED PIN GY6.35 is a low voltage lamp bulb with a wealth of benefits including an A++ energy efficient classification. The lamp bulb is mercury free and is the excellent LED alternative to low voltage halogen lamps. With numerous ...
Ready-for-use resistor to set output current valueCompatible with ...
Description:
Ready-for-use resistor to set output current valueCompatible with LED Driver featuring I-select 2 interface, not compatible with I-select (generation 1)Resistor is base isolatedResistor power 0.25 WCurrent tolerance ± 2 % additional to output current toleranceCompatible with LED Driver series PRE ...