PowerLED PRDIM LED Power Repeater for use with DALI, DMX, Push & CV Series Power LED Dimmer

  • RS-stocknr. 786-9014
  • Fabrikantnummer PRDIM
  • Fabrikant PowerLED
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

PRDIM 4 Channel LED Power Repeater

The PRDIM LED power repeater module, from PowerLED, allows one controller to control multiple connections. This allows an increased number of LED strips to be powered from one LED driver. With 4 x 3A output channels the PRDIM LED power repeater can be used with both RGB and single colour LED flexi strips and is suitable for domestic, commercial and retail internal lighting applications such as: accent lighting, mood lighting, cove lighting, under cabinet lighting, decorative lighting and display cabinet lighting.

Designed for increasing the quantity of LED strip lights, one RGB controller can control multiple connections
Provides 4 x 3A (max.) output channels
Easy installation via quick connect terminals
Input/output voltage: 12-36VDC
Operating temperature range: -20 to +50°C

Specificaties
Kenmerk Waarde
Accessory Type LED Power Repeater
For Use With DALI, DMX, Push & CV Series Power LED Dimmer
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
46,67
(excl. BTW)
56,47
(incl. BTW)
Aantal stuks
Per stuk
1 - 1
€ 46,67
2 - 4
€ 44,53
5 +
€ 41,45
Related Products
Ready-for-use resistor to set output current valueCompatible with ...
Description:
Ready-for-use resistor to set output current valueCompatible with LED Driver featuring I-select 2 interface, not compatible with I-select (generation 1)Resistor is base isolatedResistor power 0.25 WCurrent tolerance ± 2 % additional to output current toleranceCompatible with LED Driver series PRE ...
Optional strain-relief set for independent applicationsTransforms the LED ...
Description:
Optional strain-relief set for independent applicationsTransforms the LED Driver into a fully class II compatible LED Driver (e.g. ceiling installation)Easy and tool-free mounting to the LED Driver, screwless cable-clamp channels for long strain-relief (30 x 43 x 30 mm)With screws ...
The DMX Bridge can be used to integrate ...
Description:
The DMX Bridge can be used to integrate analog DC dimmer signals into LEDSync or DMX network. The DMX bridges are ideal for retrofitting existing lighting installations. The Pro version offer parameter settings for maximum flexibility and system integration. The ...
The DLA101W1 faceplate kit from eldoLED is designed ...
Description:
The DLA101W1 faceplate kit from eldoLED is designed for use with the DimWheel Colour network dimmer. The kit consists of a white plastic faceplate with an aluminium dial and screw fixings. The DLA101W1 also features a light pipe assembly which ...