Recom RACD30-500, Constant Current LED Driver 30W 10 → 56V 500mA

  • RS-stocknr. 760-4716
  • Fabrikantnummer RACD30-500
  • Fabrikant Recom
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Recom 30W Constant Current LED Power Supply - RACD30 Series

RACD30 30W constant current Class II AC/DC LED power supply with a universal input voltage range, single output and active power factor correction (PFC). These constant current LED switching power modules are suitable for driving up to 15 high power LEDs. Screw terminal and socket output connections are featured on these constant current AC/DC LED power supplies, the use of the socket connector avoids miswiring and damage to the LED load if the LEDs are preassembled into a wiring harness or lamp fitting

Universal AC input voltage range
Constant current output
Drives 3 to 15 high brightness LEDs
Active power factor correction >0.95
3 kVAC isolation
Fused input
Overload, short circuit, and output overvoltage and overtemperature protection
Screw terminal and output socket (5.5mm with 2mm pin) connections
EMC compliance to EN55015:2006 +A1: 2007 + A2:2009
Harmonic current compliance to EN 61000-3-2:2006

Note

Stock number 760-4716 drives 15 x 2W LEDs
Stock number 760-4719 drives 12 x 3W, 12+12 x 1W LEDs

For Industrial Use Only, not in scope of Regulation (EC) No 125/2009.

Standards

Designed to meet UL1310 and FCC18A
Certifications: UL8750, EN 61347-1: 2008, EN 61347-2-13:2006

Approvals

cULs

Recom - Constant Current LED Power Supply

Specificaties
Kenmerk Waarde
Input Voltage 90 → 264 V ac
Output Voltage 10 → 56V
Operation Constant Current
Output Current 500mA
Maximum Output Power 30W
AC or DC Input Voltage Ac
IP Rating IP20
Voltage Rating 90 → 264V ac
4 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
27,89
(excl. BTW)
33,75
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 27,89
5 - 9
€ 26,77
10 - 24
€ 26,22
25 - 49
€ 25,66
50 +
€ 25,10
Related Products
The STP16DP05 is a low voltage, low current ...
Description:
The STP16DP05 is a low voltage, low current 16-bit shift register designed for LED panel displays. The sixteen output regulated current sources provide up to 100 mA adjustable range of constant current. The LED driver features open and short LED ...
Ready-for-use resistor to set output current valueCompatible with ...
Description:
Ready-for-use resistor to set output current valueCompatible with LED Driver featuring I-select 2 interface, not compatible with I-select (generation 1)Resistor is base isolatedResistor power 0.25 WCurrent tolerance ± 2 % additional to output current toleranceCompatible with LED Driver series PRE ...
Non-isolatedDrives up to ten 2W power LEDsConstant current ...
Description:
Non-isolatedDrives up to ten 2W power LEDsConstant current sourceOutput current accuracy ±2%, Output current stability ±1%Efficiency up to 96%Wide input voltage rangeShort circuit protectionCompact package.
Non-isolatedDrives up to ten 2W power LEDsConstant current ...
Description:
Non-isolatedDrives up to ten 2W power LEDsConstant current sourceOutput current accuracy ±2%, Output current stability ±1%Efficiency up to 96%Wide input voltage rangePWM digital and analogue voltage dimmingRemote On/Off control pin0 to 4Vdc analogue dimmingShort circuit protectionCompact package.