Infineon ILD403512VBOARDTOBO1, 12 V LED Driver Evaluation Board for ILD4035

  • RS-stocknr. 122-2442
  • Fabrikantnummer ILD403512VBOARDTOBO1
  • Fabrikant Infineon
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: SG
Productomschrijving

Infineon 12V LED Evaluation Board for ILD4035 LED Driver IC

The ILD4035 12V Board is a demo board for the ILD4035 hysteretic step down LED IC driver. The resistance has been optimised to drive a string of 3 series LEDs at the max current of 350 mA with an input voltage of 12V. A “Multifunctional Pin” input terminal is included for analogue or PWM dimming. PWM dimming frequencies up to 300 Hz (at 100:1 contrast ratio) and up to 100 Hz (at 300:1 contrast ratio) are possible. The ILD4035 integrates protection features as over-voltage protection, overcurrent protection and temperature protection.
Typical applications of the ILD4035 include commercial and decorative lighting, LED replacement lamps (e.g. MR16) and architectural lighting.

Features

Wide Input Voltage Range (from 4.5 V to 40 V)
Internal switch for up to 400 mA average LED
Analogue or digital dimming possible
Soft-start capability
Low shut down current
Overcurrent protection
Over-voltage protection
Temperature protection

Specificaties
Kenmerk Waarde
LED Technology LED Driver
Kit Classification Evaluation Board
Featured Device ILD4035
Kit Name 12 V
7 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
21,75
(excl. BTW)
26,32
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 21,75
5 +
€ 20,56
Related Products
The VM810C is a development module for the ...
Description:
The VM810C is a development module for the FTDI FT810 graphics engine device. It supports any LCD panel that meets the FT810 technical specification and fits the VM810C display connector. FT810 EVE2 Embedded Graphics Engine device40-way Flex-Cable connector for LCD ...
This is a single stage power factor corrected ...
Description:
This is a single stage power factor corrected TRIAC dimmable isolated flyback LED driver intended for lighting applications such as down lights, PAR lamps and residential/commercial LED fixtures. The NCL30000 is based on a fixed on-time, critical conduction mode (CrM) ...
Automotive turn signals are sometimes designed to display ...
Description:
Automotive turn signals are sometimes designed to display an indicator in a fashion such that lights are activated in a sequencing manner to show directional intent. This evaluation note highlights the use of standard logic integrated circuits with the NCV7691 ...
The ATSAMD21BLDC24V-STK is a low-voltage BLDC/PMSM motor control ...
Description:
The ATSAMD21BLDC24V-STK is a low-voltage BLDC/PMSM motor control starter kit. The kit consists of a high-current driver board with sensing circuits and a plug-in ATSAMD21 microcontroller board. • 6 x NTMFS5C646NL power MOSFETs configured as 3 x half-bridge drivers • ...