Adafruit 2864, NeoPixel 40 RGBW Warm White LED Matrix Shield for Arduino

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

NeoPixel Shield 5 x 8 RGBW LED Matrix

The Adafruit NeoPixel Shield has 40 super bright LEDs in an 5 x 8 matrix. Each NeoPixel is 'split' with one half being RGB and the other is a white LED. This combined LED enables you to choose any colour or illuminate using with white light. Available in 3 colours of white light – warm white (3000K), neutral white (4500K) and warm white (6000K). This LED matrix shield will fit neatly on top of you Arduino board.

If you need more, then you can also daisy chain NeoMatrix together. For the second shield, connect the DIN connection to the first panel DOUT.

There is a single data line with a timing-specific protocol. Since the protocol is sensitive to timing, it requires a real-time microcontroller such as an AVR, Arduino, PIC or mbed.

Adafruit 2864 - NeoMatrix 40 RGBW, Warm White (RS 124-5493)
Adafruit 2865 - NeoMatrix 40 RGBW, Neutral White (RS 124-5494)
Adafruit 2866 - NeoMatrix 40 RGBW, Cool White (RS 124-5495)

Dimensions: 53 x 69 x 3 mm / 2.1" x 2.7" 0.1"
Weight: 27.1 g

Larger 64 RGBW LED versions in an 8 x 8 matrix are also available with the same colour temperature options (RS 124-5496, 124-5497, 124-5498).

Adafruit LEDs, Drivers and Shields

Specificaties
Kenmerk Waarde
LED Technology LED Matrix
Kit Classification Shield
For Use With Arduino
Kit Name NeoPixel 40 RGBW Warm White
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
35,59
(excl. BTW)
43,06
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 35,59
Related Products
The ILH-SK01-xx95-SC201-xx series of LED star modules, from ...
Description:
The ILH-SK01-xx95-SC201-xx series of LED star modules, from Intelligent LED Solutions, feature a Stanley Electric 6J series LED to provide outstanding luminance and a Colour Rendering Index (CRI) in excess of 95 including the R9 and R15 values. PowerStars are ...
The MCP1630 Boost Mode LED Driver Demo Board ...
Description:
The MCP1630 Boost Mode LED Driver Demo Board is a step-up, switch-mode, dc-dc converter used for power LED applications. The demo board provides a 350mA or 700mA constant current source with jumper selection. The operating supply is 9Vdc to 16Vdc ...
Description:
The Infineon MR16 3W BOARD is a control board for MR16 low voltage halogen replacement lamps with the ILD4035 hysteretic step down LED IC driver. The control board has 2 input pins to connect a 12V ac power supply and ...
The Infineon EVALLEDICL8201F1 is designed using the LED ...
Description:
The Infineon EVALLEDICL8201F1 is designed using the LED driver ICL8201 and the N-Channel MOSFET transistor IPU50R3K0CE. The ICL8201 cascode topology enables lower system cost and higher system efficiency. Typical applications are GU10 LED Lamp. Supports wide range AC or DC ...