Adafruit 2865, NeoPixel 40 RGBW Natural White LED Matrix Shield for Arduino

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

NeoPixel Shield 5 x 8 RGBW LED Matrix

The Adafruit NeoPixel Shield has 40 super bright LEDs in an 5 x 8 matrix. Each NeoPixel is 'split' with one half being RGB and the other is a white LED. This combined LED enables you to choose any colour or illuminate using with white light. Available in 3 colours of white light – warm white (3000K), neutral white (4500K) and warm white (6000K). This LED matrix shield will fit neatly on top of you Arduino board.

If you need more, then you can also daisy chain NeoMatrix together. For the second shield, connect the DIN connection to the first panel DOUT.

There is a single data line with a timing-specific protocol. Since the protocol is sensitive to timing, it requires a real-time microcontroller such as an AVR, Arduino, PIC or mbed.

Adafruit 2864 - NeoMatrix 40 RGBW, Warm White (RS 124-5493)
Adafruit 2865 - NeoMatrix 40 RGBW, Neutral White (RS 124-5494)
Adafruit 2866 - NeoMatrix 40 RGBW, Cool White (RS 124-5495)

Dimensions: 53 x 69 x 3 mm / 2.1" x 2.7" 0.1"
Weight: 27.1 g

Larger 64 RGBW LED versions in an 8 x 8 matrix are also available with the same colour temperature options (RS 124-5496, 124-5497, 124-5498).

Adafruit LEDs, Drivers and Shields

Specificaties
Kenmerk Waarde
LED Technology LED Matrix
Kit Classification Shield
For Use With Arduino
Kit Name NeoPixel 40 RGBW Natural White
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
35,59
(excl. BTW)
43,06
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 35,59
Related Products
The MCP1630 Boost Mode LED Driver Demo Board ...
Description:
The MCP1630 Boost Mode LED Driver Demo Board is a step-up, switch-mode, dc-dc converter used for power LED applications. The demo board provides a 350mA or 700mA constant current source with jumper selection. The operating supply is 9Vdc to 16Vdc ...
Description:
The Infineon MR16 3W BOARD is a control board for MR16 low voltage halogen replacement lamps with the ILD4035 hysteretic step down LED IC driver. The control board has 2 input pins to connect a 12V ac power supply and ...
Description:
The BCR402 12V LED Board is a demo board for the BCR402W LED driving 3 x 0.2W LEDs in series. The PC boards have DC connectors at each end to create longer or shorter light arrays. To accommodate different applications ...
Description:
The BCR402 24V LED Board is a demo board for the BCR402W LED driving 6 x 0.2W LEDs in series. The PC boards have DC connectors at each end to create longer or shorter light arrays. To accommodate different applications ...