mikroBus Click add-on 2-digit 7-seg LED

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CS
Productomschrijving

7seg click mikroBUS™

The Click accessory modules plug into the mikroBUS sockets in MikroElektronika microcontroller development boards. The 7seg click is easy to use and lets you add a two digit seven segment display to your device. It features two 74HC595 shift register ICs, green power LED and SMD jumper.

mikroBUS™ form factor
Two 7 segment digits on-board
7seg Click connects with target board via SPI interface
SMD Jumper: Operates on 3.3 V or 5 V power supply
2 x 74HC595 serial-in parallel-out shift registers with SPI interface
Supported in all MikroElektronika compilers.
mikroBUS™ is a specially designed pinout standard with SPI, I2C, Analogue, UART, Interrupt, PWM, Reset and power supply pins

Note

Click board comes with the header strips soldered.

Click mikroBUS™ Display & Graphics Boards

Specificaties
Kenmerk Waarde
LED Technology LED
Kit Classification Add On Board
Kit Name 7seg Click
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
9,07
(excl. BTW)
10,97
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 9,07
5 - 9
€ 8,71
10 +
€ 8,36
Related Products
The 40W LZ4 RGBW Power emitter produces a ...
Description:
The 40W LZ4 RGBW Power emitter produces a full spectrum of brilliant colours with the highest flux density by allowing each die to be driven at up to 3.0A. Through its compact 2.15mm x 2.15mm Light Emitting Area, it delivers ...
The OSLON Signal PowerStar series of LED modules ...
Description:
The OSLON Signal PowerStar series of LED modules from Intelligent LED Solutions (ILS), feature four OSLON Signal ThinGan (UX:3) LED. Utilising OSRAM’s latest power chip technology they remain efficient when driven at currents of up to 1000 mA. The OSLON ...
The STMicroelectronics STEVAL-ILL079V1 is an inverting buck-boost LED ...
Description:
The STMicroelectronics STEVAL-ILL079V1 is an inverting buck-boost LED driver evaluation board. The board features the LED6000 current regulator. The LED600 is a monolithic current source with dimming capability, for driving high-power LEDs. The device offers a wide input voltage range, ...
The ELM 4 series of LED spacers from ...
Description:
The ELM 4 series of LED spacers from Bivar are designed to fit T1 3/4 LEDs. The ELM 4 self-retaining narrow profile LED mounts serve as a lead forming fixture while uniformly aligning and elevating LEDs making assembly easier, uniformity ...