LED Reflector Bulb, Telephone Slide, Green, Single Chip, 6.8 mm Lamp, 6.8mm dia., 24 V ac/dc

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

T6.8 ac/dc LEDs

An RS Pro range of T6.8 LED telephone slide filament indicators, intended for illumination in confined spaces. Suited as replacements and for applications in industries such as automotive, gaming, marine and avionics.

Features and Benefits

Single chip LED with reflector
12, 28, 48V ac/dc types
Half-wave rectifier
Body colour coded
Anode identified by + sign side contact
Reverse polarity protection diode

Specificaties
Kenmerk Waarde
Voltage Rating 24 V ac/dc
Light Output Colour Green
Intensity 2100 mcd
Lamp Base Telephone Slide
Lamp Size 6.8 mm
Chip Type Single Chip
Diameter 6.8mm
Length 45 mm
Peak Wavelength 525 nm
Current Rating 15 mA
Life Hours 100000h
76 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
201 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
8,50
(excl. BTW)
10,28
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
€ 8,50
25 - 49
€ 7,90
50 - 99
€ 6,13
100 - 249
€ 4,95
250 +
€ 4,42
Related Products
Multi-chip LEDs are semi-conducting alternatives to incandescent filament ...
Description:
Multi-chip LEDs are semi-conducting alternatives to incandescent filament lamps. Construction consists of standard filament lamp bases incorporating a current limiting resistor and a cluster of LED chips bonded onto a substrate. Multi-chip LEDs have many advantages over standard filament lamps. ...
Multi-chip LEDs are semi-conducting alternatives to incandescent filament ...
Description:
Multi-chip LEDs are semi-conducting alternatives to incandescent filament lamps. Construction consists of standard filament lamp bases incorporating a current limiting resistor and a cluster of LED chips bonded onto a substrate. Multi-chip LEDs have many advantages over standard filament lamps. ...
Each switch has two sets of SPST contacts, ...
Description:
Each switch has two sets of SPST contacts, one normally open and one normally closed, permitting a wide variety of switching functions to be carried outA complete assembly requires a switch unit (or indicator), a lens and a lamp, each ...
A series of ultra-bright, sunlight-readable, water-clear LED’s suitable ...
Description:
A series of ultra-bright, sunlight-readable, water-clear LED’s suitable for a variety of applications. Specially manufactured lens provides a very wide viewing angle and high intensity output. Intensities are stated at the following viewing angles for the LED’s: Red 30°, Green ...