RS PRO Red LED Reflector Bulb, 12V dc, E5 Base, 6mm Diameter, 45mcd
- RS-stocknr.:
- 211-049
- Fabrikant:
- RS PRO
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 211-049
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en compliance
- Land van herkomst:
- GB
Productomschrijving
T1.5 LES Multi-Chip LEDs
LED lamps containing 6 LED chips and a current limiting resistor
Positive to be connected to the base contact
Viewing angle 180°
Positive to be connected to the base contact
Viewing angle 180°
Multi-Chip LEDs
Multi-chip LEDs are semi-conducting alternatives to incandescent filament lamps. Construction consists of standard filament lamp bases incorporating a current limiting resistor and a cluster of LED chips bonded onto a substrate. Multi-chip LEDs have many advantages over standard filament lamps.
Very high immunity to shock and vibration
Current consumption is between 50 and 65% lower
Lower operating temperatures
Current consumption is between 50 and 65% lower
Lower operating temperatures
Note
The operating voltage must not be exceeded by more than 10% as this will result in reduced life expectancy.
Specificaties
Kenmerk | Waarde |
|---|---|
| Voltage Rating | 12V dc |
| Light Output Colour | Red |
| Intensity | 45mcd |
| Lamp Base | E5 |
| Chip Type | Multichip |
| Diameter | 6mm |
| Length | 18mm |
| Viewing Angle | 180 ° |
| Peak Wavelength | 635nm |
| Current Rating | 15mA |
| Life Hours | 60000h |