LED Reflector Bulb, Wire Terminal, Yellow, Single Chip, 7.87mm dia., 10 → 20 V ac, 6 → 13.5 V dc

  • RS-stocknr. 891-4415
  • Fabrikantnummer 2191U7-12V
  • Fabrikant VCC
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

2191U Series LED Solid-State Indicator Lights

VCC 2191U series non-replaceable lamp solid-state LED indicator lights, complete with built-in current limiting resistor and rectifier diode. The 2191QL series are push fit mounted into a 8 mm panel cut out, and supplied with a push-on speed nut to secure.

Wire leads: 120 mm long
Polycarbonate lens
Anode (+) red lead
White nylon housing
Polished stainless steel bezel

Panel Mount LED Indicators, VCC

Specificaties
Kenmerk Waarde
Voltage Rating 6 → 13.5 V dc, 10 → 20 V ac
Light Output Colour Yellow
Lamp Base Wire Terminal
Chip Type Single Chip
Diameter 7.87mm
Length 40.39 mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 06-03-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 500)
2,70
(excl. BTW)
3,27
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
500 +
€ 2,70
€ 1.350,00
*prijsindicatie
Related Products
An RS Pro range of T5.5 LED telephone ...
Description:
An RS Pro range of T5.5 LED telephone slide filament indicators, intended for illumination in confined spaces. Suited as replacements and for applications in industries such as automotive, gaming, marine and avionics. High-quality LED light 12, 24, 28, 48 V ...
Brought to you under the trusted RS Brand, ...
Description:
Brought to you under the trusted RS Brand, these BA9s indicator lamps have a single chip LED with a built in reflector, optimising brightness and intensity while maintaining low energy consumption. The lamps are fitted with a convenient bayonet connector ...
Single chip LED with reflector24V ac/dc typesHalf-wave rectifierBody ...
Description:
Single chip LED with reflector24V ac/dc typesHalf-wave rectifierBody colour codedAnode identified by + sign side contactReverse polarity protection diode.
Each switch has two sets of SPST contacts, ...
Description:
Each switch has two sets of SPST contacts, one normally open and one normally closed, permitting a wide variety of switching functions to be carried outA complete assembly requires a switch unit (or indicator), a lens and a lamp, each ...