LED Reflector Bulb, Wire Terminal, Green, Single Chip, 7.87mm dia., 12 → 24 V dc, 22 → 32 V ac

  • RS-stocknr. 891-4796
  • Fabrikantnummer 2191L5-24V
  • Fabrikant VCC
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

2191L Series LED Solid-State Indicator Lights

VCC 2191L series non-replaceable lamp solid-state LED indicator lights, complete with built-in current limiting resistor and rectifier diode for optimum LED performance. The 2191L series are push fit mounted into an 8 mm panel cut out, and supplied with a push-on speed nut to secure.

120 mm wire leads
Polycarbonate lens
Polished stainless steel bezel
Anode (+) red lead
White nylon housing

Panel Mount LED Indicators, VCC

Specificaties
Kenmerk Waarde
Voltage Rating 12 → 24 V dc, 22 → 32 V ac
Light Output Colour Green
Lamp Base Wire Terminal
Chip Type Single Chip
Diameter 7.87mm
Length 41.91 mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 26-11-2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 10)
3,219
(excl. BTW)
3,895
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 +
€ 3,219
€ 32,19
*prijsindicatie
Related Products
Brought to you by RS Pro, these LED ...
Description:
Brought to you by RS Pro, these LED indicators are single chip and feature a simple lead pin connection for easy installation. Providing a good level of brightness over a long service life, these T1 sized LED indicators are suitable ...
This range of T-3 1/4 miniature bayonet base ...
Description:
This range of T-3 1/4 miniature bayonet base cool white LED lamps from JKL Components are non-polarized and operate from both AC and DC voltage supplies. Colour temperature: 6000KViewing angle: 30°Maximum current rating: 20mADiameter: 9.6mmOverall length: 24mm.
This range of T-3 1/4 miniature bayonet base ...
Description:
This range of T-3 1/4 miniature bayonet base cool white LED lamps from JKL Components are non-polarized and operate from both AC and DC voltage supplies. Colour temperature: 6000KViewing angle: 30°Maximum current rating: 20mADiameter: 9.6mmOverall length: 24mm.
Transformer lampholders designed to provide an output for ...
Description:
Transformer lampholders designed to provide an output for a 6 V MES filament lamp which is isolated from the mains supply. This ensures greater safety/longer life than a mains filament lamp and superior illumination to a neon lamp.,These units are ...