LEDiL C14658_BARBARA-RZ-LENS, Barbara Series LED Reflector Sublens, Round Beam

  • RS-stocknr. 891-0438
  • Fabrikantnummer C14658_BARBARA-RZ-LENS
  • Fabrikant Ledil
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

LEDiL BARBARA Series Sublenses

A range of sublenses from LEDiL designed for use with the BARBARA LED reflectors. These clear sublenses can be placed under the BARBARA reflector before mouting, providing additional beam control.

Note

The viewing angle produced (the full angle measured at the half peak luminous intensity value) will vary depending on the chip size, colour and position of the LED.

LEDiL Reflectors

Specificaties
Kenmerk Waarde
Series Barbara
Number of LEDs Per Lens 1
Emission Pattern Round
Dimensions 26.5 x 8.4mm
Diameter 26.5mm
Height 8.4mm
Kit Contents Lens
930 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Pack of 10)
1,078
(excl. BTW)
1,304
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 40
€ 1,078
€ 10,78
50 - 190
€ 1,024
€ 10,24
200 - 490
€ 0,745
€ 7,45
500 +
€ 0,568
€ 5,68
*prijsindicatie
Related Products
The TITANIUM / SPUTNIK series from LEDiL, are ...
Description:
The TITANIUM / SPUTNIK series from LEDiL, are a family of round LED lenses with 26 mm diameter. This range is designed for use with a single LED and come in a wide variety of options including clear or diffused. ...
The LEILA series from LEDil, are a family ...
Description:
The LEILA series from LEDil, are a family of round LED lens assemblies with a black or white PC holder. This range is designed for use with a single LED and come in a wide variety of options including clear ...
The TINA series from LEDil, are a family ...
Description:
The TINA series from LEDil, are a family of round LED lenses with 16 mm diameter. There are two types of lens within the TINA family, one with a black PC holder and one with a white PC holder. This ...
The CUTE series from LEDiL, are a family ...
Description:
The CUTE series from LEDiL, are a family of round LED lenses with a diameter of 35 mm. These multi-lens arrays are designed for use with 3 or 4 LEDs (the last number within the part no. denotes the number ...