LEDiL C13528_VERONICA-RS, Veronica Series LED Lens, Round Beam

  • RS-stocknr. 891-0621
  • Fabrikantnummer C13528_VERONICA-RS
  • Fabrikant Ledil
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

LEDiL VERONICA Series LED Lenses

The VERONICA series from LEDil, are a family of round LED lenses with a square or round base. They are TIR lenses for installations with potting resin. VERONICA lenses act as an optical element, structural holder and sealing surface. Designed for indoor and outdoor applications the VERONICA lenses can be used for IP ratings of up to IPx8.
This range is designed for use with a single LED. They offer a range of beam angles from a spot to wide, and even an oval beam option. VERONICA lenses direct the light from an LED light source through the lens to achieve the desired beam emission type with a uniform output.
VERONICA-SQ lenses have an adhesive tape for easy installation and a slightly smaller footprint than the standard VERONICA lenses.
Made using an optical grade PMMA, the VERONICA lenses offer a high UV and temperature resistance. VERONICA lenses have been designed and optimised for use with a variety of LEDs. Due to the rapidly changing nature of LED products customers are strongly advised to consult the latest manufacturer data for compatible LEDs.

Note

The viewing angle produced (the full angle measured at the half peak luminous intensity value) will vary depending on the chip size, colour and position of the LED.

LEDiL Single LED Lenses

Specificaties
Kenmerk Waarde
Series Veronica
Number of LEDs Per Lens 1
Emission Pattern Round
Viewing Angle 10 16 °
Affixing Method Glue, Pin
For Use With Cree XB-H, Cree XM-L2, Cree XP-G, Cree XP-G2, Lumileds LUXEON A, Lumileds LUXEON Rebel, Nichia NCSxx19A, Nichia NVSxx19A, Nichia NVSxx19B, Nichia NVSxx19C, Samsung LH351B, Samsung LH351Z
Dimensions 26 x 12.2mm
Clear or Diffused Clear
Diameter 26mm
Height 12.2mm
Kit Contents Lens, Optic
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 04-08-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 7)
1,907
(excl. BTW)
2,307
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
7 - 28
€ 1,907
€ 13,349
35 - 63
€ 1,586
€ 11,102
70 - 168
€ 1,51
€ 10,57
175 - 343
€ 1,137
€ 7,959
350 +
€ 1,016
€ 7,112
*prijsindicatie
Related Products
An attractive snap-in panel mount lens suitable for ...
Description:
An attractive snap-in panel mount lens suitable for use with T1-3/4 (5mm) LEDs. The lens is ideal for use with narrow beam LEDs to increase the viewing angle. The lens can also be used with 5mm filament or neon lamps. ...
Part of the Polymer Optics Modular LED Optics® ...
Description:
Part of the Polymer Optics Modular LED Optics® range. High collection efficiencyLenses precision moulded in optical grade Polycarbonate for thermal stability and system durabilityHexagonal design allows the optics to be clustered together to make larger narrow angle colour mixing arraysBasic ...
Designed to give even illuminance over a square ...
Description:
Designed to give even illuminance over a square area using a single LED. Recommended for ceiling luminaires mounted in a square pattern separated by up to 3.33x the mounting height. For example a square pattern of luminaires mounted at 6m ...
Part of the Polymer Optics Modular LED Optics® ...
Description:
Part of the Polymer Optics Modular LED Optics® range. High collection efficiencyLenses precision moulded in optical grade Polycarbonate for thermal stability and system durabilityHexagonal design allows the optics to be clustered together to make larger narrow angle colour mixing arraysBasic ...