174, 7 cell MCPCB LED Prototyping Board for Luxeon I LEDs, Luxeon III LEDs, Luxeon K2 LEDs

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

MCPCB Hex. Bare Boards

Part of the Polymer Optics Modular LED Optics® range, these Metal Core Printed Circuit Boards (MCPCBs) mate with hexagonal cluster optics and can be used for customer prototyping and luminaire production using emitter LED devices.

Specificaties
Kenmerk Waarde
Type 7 cell MCPCB
For Use With Luxeon I LEDs, Luxeon III LEDs, Luxeon K2 LEDs
Tijdelijk niet op voorraad – voor levertijd of een alternatief product neem contact op via Live Chat of zoek een vergelijkbaar product op de website.
Prijs Each (In a Box of 50)
2,155
(excl. BTW)
2,608
(incl. BTW)
Aantal stuks
Per stuk
Per doos*
50 - 200
€ 2,155
€ 107,75
250 - 450
€ 2,008
€ 100,40
500 +
€ 1,958
€ 97,90
*prijsindicatie
Related Products
Veroboards brilliant copper stripboard will suit your purpose ...
Description:
Veroboards brilliant copper stripboard will suit your purpose for doing simple prototyping work or for development circuitry. It is manufactured from a copper clad laminate board. It features pierced copper tracks and a base material of SRBP. Stripboards also give ...
Prototyping boards manufactured from epoxy glass material to ...
Description:
Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 ...
Completely drilled boards, designed for the development of ...
Description:
Completely drilled boards, designed for the development of prototypes of analogue circuits.Thanks to the use of APW plugs, these cards are very versatile and allow discreet components to be connected wire-to-wire, or enable plugs and wrap pins to be fitted. ...
The Cif Athelec matrix board is 100mm long ...
Description:
The Cif Athelec matrix board is 100mm long and 160mm wide. It is a single-sided board with 1mm holes and 2.54mm pitch. • 15/10th tinned copper clad pads on CEM 1• A gap of 0.54mm on the whole surface• Copper ...