LEDiL Regina LED Reflector, 10°

  • RS-stocknr. 786-1398
  • Fabrikantnummer C11347_REGINA
  • Fabrikant Ledil
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

LEDiL REGINA Series LED Reflectors

The REGINA LED reflector, from LEDil, is designed for use with single LED light sources from several manufacturers including: Cree XP-E and XP-G, Nichia NCSxx19A and NVSxx19A, Osram OS Oslon SSL 150 and Oslon SSL 80, Philips Lumileds LUXEON Rebel and LUXEON Rebel ES and Seoul Semiconductors Z5.

Reflector diameter: 19mm
Reflector material: metallised polycarbonate

Note

The viewing angle produced (the full angle measured at the half peak luminous intensity value) will vary depending on the chip size, colour and position of the LED used.

LEDiL Reflectors

Specificaties
Kenmerk Waarde
Series Regina
Beam Angle 10°
Dimensions 19 (Dia.) x 15.3mm
For Use With Cree XP-E, Cree XP-G, Lumileds LUXEON Rebel, Lumileds LUXEON Rebel ES, Nichia NCSxx19A, Nichia NVSxx19A, OSRAM OSLON SSL 150, OSRAM OSLON SSL 80, Seoul Z5
Fixing Method Glue, Pin
Diameter 19mm
Height 15.3mm
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
96 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 4)
3,41
(excl. BTW)
4,13
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
4 - 16
€ 3,41
€ 13,64
20 - 36
€ 2,845
€ 11,38
40 +
€ 2,70
€ 10,80
*prijsindicatie
Related Products
The MIRELLA series of LED reflectors, from LEDil, ...
Description:
The MIRELLA series of LED reflectors, from LEDil, are designed for use with CoB LEDs and large single die LEDs to produce MR16 LED lamps. MIRELLA reflectors are manufactured using an impact-resistant UL 94 V-2 rated PC. They come with ...
From BJB, this LED Holder is for use ...
Description:
From BJB, this LED Holder is for use with CoB LEDS from the Cree range. The PBT plastic fixing has M3 screw holes with a locking washer for easy fitting, and features an integrated reflector interface.
A range of LED reflectors from Polyer Optics. ...
Description:
A range of LED reflectors from Polyer Optics. They utilise a modular LED optic design, based on a hexagonal format, to allow maximum packing density and assembly flexibility, arrays of single colour or colour mixed cells can be easily constructed. ...
Part of Polymer Optics “Modular LED Optics”® range; ...
Description:
Part of Polymer Optics “Modular LED Optics”® range; The Colour Mixer Reflector utilizes a colour mixing chamber to produce a uniform colour beam, with which the output reflector optic provides a narrow colour mixed beam. Narrow beam angle, half angel: ...