LEDiL Minnie LED Reflector, 74°, For Use With Cree MT-G, Lumileds LUXEON M, Nichia NSMx286M

  • RS-stocknr. 786-1587
  • Fabrikantnummer C12097_MINNIE-WWW
  • Fabrikant Ledil
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

LEDiL MINNIE Series LED Reflectors

The MINNIE series from LEDil, are a family of round LED reflectors. There are two types of reflectors within the MINNIE family, one with a PC holder and one without. They also offer a range of beam angles from medium to extra wide.
Made using a durable PC resin with an aluminium coating and protective lacquer, the MINNIE reflectors provide over 90% optical efficiency. MINNIE lenses have been designed and optimised for use with a variety of LEDs. Due to the rapidly changing nature of LED products customers are strongly advised to consult the latest manufacturer data for compatible LEDs

Reflector diameter: 35mm (with holder) or 32.4mm (without holder)
Reflector fastening: Adhesive tape (with holder) or glue (without holder)

The viewing angle produced (the full angle measured at the half peak luminous intensity value) will vary depending on the chip size, colour and position of the LED.

LEDiL Reflectors

Specificaties
Kenmerk Waarde
Series Minnie
Beam Angle 74°
Dimensions 32.4 (Dia.) x 14.75mm
For Use With Cree MT-G, Lumileds LUXEON M, Nichia NSMx286M
Fixing Method Glue
Diameter 32.4mm
Height 14.75mm
20 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Pack of 4)
3,41
(excl. BTW)
4,13
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
4 - 16
€ 3,41
€ 13,64
20 - 36
€ 2,853
€ 11,412
40 - 96
€ 2,683
€ 10,732
100 - 196
€ 2,523
€ 10,092
200 +
€ 2,37
€ 9,48
*prijsindicatie
Related Products
This reflector adaptor plate is designed for use ...
Description:
This reflector adaptor plate is designed for use with the Cluster LED modules from ILS. It sits between the LED module and the heatsink, providing an easy mounting solution for secondary reflectors. Therefore making it easier for you to assemble ...
Molex’s LED Array Holders are ideal for OEM ...
Description:
Molex’s LED Array Holders are ideal for OEM light-fixture manufacturers, they simplify the Nichia CoB-L LED installation process and reduce installation time through the use of compression contacts that eliminate the need for hand or SMT soldering and expensive SMT ...
From BJB, this LED Holder is for use ...
Description:
From BJB, this LED Holder is for use with CoB LEDS from the Cree range. The PBT plastic fixing has M3 screw holes with a locking washer for easy fitting, and features an integrated reflector interface.
The LENA series of LED reflector assemblies from ...
Description:
The LENA series of LED reflector assemblies from LEDil, provide uniform light from a single LED light source. The LENA reflector assemblies form part of a larger system that provides a wide variety of possibilities. A LENA adaptor base can ...