Mobrey Side Mount Level Switch SPST Output

  • RS-stocknr. 185-9853
  • Fabrikantnummer S01DB/F68/1
  • Fabrikant Mobrey
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Industrial-Pump Control, Horizontal Float

A side mounting magnetically activated liquid level switch, consisting of a one-piece cast aluminium bronze body and 316 stainless steel float with a long straight arm. It is ideal for use in industrial applications, including pump control and as a low or high level alarm.

Tough, rugged design for long life in aggressive environments
Operates in almost any liquid
Variable differential to adjust switching point
2 off independent SPST voltage-free contacts (’snap action’) for alternative make and break circuits
No contact ’hover’ or ’bounce’ for clean make or break
Mobrey ’A’ flange for mounting
M20 conduit entry with supplied cable gland (cable not supplied)
Switch body rated to IP66 (when used with supplied cable gland)
Marine approvals

//media.rs-online.com/t_line/L185985-01.gif
//media.rs-online.com/t_line/LD185985-02.gif
//media.rs-online.com/t_line/LI185985-02.gif
Specificaties
Kenmerk Waarde
Device Type Liquid Level Switch
Mounting Type Side Mount
Switch Output SPST
Body Material Aluminium Bronze
Maximum Operating Temperature +210°C
Maximum Current 2 A dc, 5 A ac
Maximum Pressure 18bar
Gasket Material Non Asbestos Sheet
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
15 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
493,88
(excl. BTW)
597,59
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 493,88
Related Products
Capacitive fill level switch with inverse frequency shift ...
Description:
Capacitive fill level switch with inverse frequency shift technologyConfigurable outputsSensitivity settingLED status displayVersion with connection cableFor detecting liquids, granulates, slurry, foam and separating layers in confined systems.
Ultrasonic liquid level switch intended for level detection ...
Description:
Ultrasonic liquid level switch intended for level detection at a fixed point when liquid fills the gap between the crystals. Polyphenylene sulphide construction, ingress protection to IP67/68. Vessel pressure 5 bar maximumWet switching level detection at a fixed point when ...
The OLS7 optical liquid level sensor designed for ...
Description:
The OLS7 optical liquid level sensor designed for single point liquid measurement. Transistor output in this model means that the user can configure this to meet individual requirements. External mounting with 1/4"NPT threadMaximum pressure 7bar.
General puropse flow switches supplied in both liquid ...
Description:
General puropse flow switches supplied in both liquid and gas sensing types. Flowline's range offers the user a reliable low or no-flow dection solution for a wide variety of applications. Robust Polypropylene-Ryton and PDVF sensors available so even corrosive liquid ...