Mobrey Horizontal, Vertical Mounting Level Switch Relay Output

  • RS-stocknr. 204-6749
  • Fabrikantnummer 003S2
  • Fabrikant Mobrey
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving
//media.rs-online.com/t_line/LD256152-01.gif
//media.rs-online.com/t_line/LF204674-99.gif
//media.rs-online.com/t_line/LI256152-01.gif

Mobrey Level Switch

The Mobrey ultrasonic liquid level switch with polyphenylene sulphide construction has output type integral SPCO relay (energised when the sensor is wet) and 1-in BSPT dual mount thread. This switch is designed for high or low-level alarm duties to give a voltage-free contact or solid-state transistor output for alarm signalling or as part of a pump control system. It is intended for level detection at a fixed point when liquid fills the gap between the crystals. The supply voltage ranges between 18VAC/DC and 30VAC/DC
Note:
If the liquid to be monitored is flowing, the device should be fitted with the gap inline with the flow. In storage tanks, it should be fitted with the gap vertical unless the liquid is highly aerated when it should be angled.

Features and Benefits


Vessel pressure of 5bar (maximum)
• Wet switching level detection at a fixed point when liquid fills the gap between the crystals
• Switched voltage is 30VDC (maximum)
• Suitable for low maintenance applications
• High reliability with no moving parts
• Not easily subject to fouling and not affected by ambient light conditions
• Fitted with three metres of cable
• Lightweight
• No moving parts
• Mounting types are horizontal and vertical

Applications


Low level alarms in header tanks
• Pump control duty in feeder tanks
• High and low alarms in storage tanks
• Level and pump control in storage tanks
• Small or thin wall tanks
• Bund level detection
• Steering gear oil

Certifications:


NEMA 6P (10ft.)/IP66/IP68 (3m)

Specificaties
Kenmerk Waarde
Device Type Gap Sensor Level Alarm Switch
Mounting Type Horizontal, Vertical
Switch Output Relay
Body Material Polyphenylene Sulfide
Cable Length 3m
Minimum Operating Temperature -20°C
Maximum Operating Temperature +70°C
Maximum Current 1 A
Maximum Pressure 5bar
22 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
413 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
228,80
(excl. BTW)
276,85
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 228,80
Related Products
Housed in a 1 piece M16 threaded polysuphone ...
Description:
Housed in a 1 piece M16 threaded polysuphone case resistant to most liquidsSuitable for use with; alcohol, vinegar, mineral oils, water, battery acid, dilute lyes, hydrochloric acid, lactic acid Sensitivity can be adjusted when working with highly reflective liquidsReverse polarity ...
A side mounting magnetically activated liquid level switch, ...
Description:
A side mounting magnetically activated liquid level switch, consisting of a one-piece cast aluminium bronze body and 316 stainless steel float with a long straight arm. It is ideal for use in industrial applications, including pump control and as a ...
Alarm or pump control for controlling between two ...
Description:
Alarm or pump control for controlling between two levels 3 electrode holdersModes: max detection, overfill (A) or min detection dry run protection (B)External LED switch status3 electrode holdersSelectable sensitivity; 100Ω to 300kΩIntegration time adjustable up to 20 secs1m x 4mm ...
Capacitive level switch for ultra-reliable detection on adhesive, ...
Description:
Capacitive level switch for ultra-reliable detection on adhesive, conductive products. Compact designPTFE coated 316L stainless steel rodPhase Selective Admittance technology to ignore build-upExact switching point even with heavy build-upPlics product, common design, easy to useExternal LED switch status and ...