Carlo Gavazzi Chassis Mount Level Sensor Relay Output

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: LT
Productomschrijving

Carlo Gavazzi VN/VNY/VPC/VPP Series

Carlo Gavazzi conductive level sensors for measuring the level of conductive liquids, i.e. max./min. control of charging or discharging. The function is determined by the amplifier relay used. The sensors are delivered with standard length electrodes - these are cut off to suit the application.

1 to 4 electrodes
Isolated or unisolated electrodes
Cable or screw connection
1/2”, 1” or 1 1/2” without pipe thread

Conductive Level Probes

Specificaties
Kenmerk Waarde
Device Type Conductive
Mounting Type Chassis Mount
Switch Output Relay
Body Material PVC
Cable Length 2m
Minimum Operating Temperature 0°C
Maximum Operating Temperature +60°C
Maximum Pressure 2bar
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 24-11-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
157,62
(excl. BTW)
190,72
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 157,62
Related Products
The Mobrey ultrasonic liquid level switch with polyphenylene ...
Description:
The Mobrey ultrasonic liquid level switch with polyphenylene sulphide construction has output type integral SPCO relay (energised when the sensor is wet) and 1-in BSPT dual mount thread. This switch is designed for high or low-level alarm duties to give ...
The Mobrey vibrating rod level switch is the ...
Description:
The Mobrey vibrating rod level switch is the perfect solution for single-point level switching in free-flowing solids across a wide density range, from fine powders to grains. A single rod design provides the solution to tuning forks which may become ...
The VEGAVIB 61 point level switch measures the ...
Description:
The VEGAVIB 61 point level switch measures the min. and max. level accurately and is an excellent choice for granular and coarse grained bulk solids. Extended version is ideal for top mounting as high level switching or side mounting through ...
Simens CLS100 Pointek range provide accurate, reliable, repeatable ...
Description:
Simens CLS100 Pointek range provide accurate, reliable, repeatable level detection. Inverse frequency shift technology uses the inverse relationship between capacitance frequency to monitor fluid level. Small changes in level result in a large change in frequency resulting in excellent accuracy. ...