Flowline EchoPod Series Vertical Mounting Ultrasonic Level Sensor Relay Output

  • RS-stocknr. 889-1356
  • Fabrikantnummer DL14-11
  • Fabrikant Flowline
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

Flowline Ultrasonic Level Switch

The Flowline Ultrasonic level transmitter provides continuous level measurement up to 49.2in (1.25m) and output current rating ranging from 4mA to 20mA and is configured via our free WebCal software. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids. It has a supply voltage of 24VDC.
Note:
Compatible with Various Flowline product ranges such as DataLoop, DataView, DataPoint and Commander

Features and Benefits

Narrow 2in beam width and short 2in dead band optimized for small tanks
Four (4) programmable relays rated at 1A/60VA for switch, pump or valve control and fail-safety
1 pump or valve with 3 alarms
2 pumps (lead-lag) with 2 alarms
2 pumps (duplexing) with 2 alarms
4 independent switch point alarms
PVDF transducer and 6P polycarbonate enclosure for corrosive liquids
Automatic temperature compensation for accurate measurement
USB adapter with fob
Cable length of 1.2m
Maximum current of 20mA
Process mount: 1in NPT (1in G)

Applications

Tanks
Skids
IBC
Sumps and process tank level applications

Certifications

cFMus certificated
CE certificated
ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007

Specificaties
Kenmerk Waarde
Device Type Multi Function Ultrasonic Transmitter
Mounting Type Vertical
Switch Output Relay
Body Material Polycarbonate
Cable Length 1.2m
Minimum Operating Temperature -35°C
Maximum Operating Temperature +60°C
Maximum DC Voltage 24V
Maximum Current 20 mA
Maximum Pressure 30psi
Gasket Material Viton
Series EchoPod
Standards Met CE, CFMus, RoHS Compliant
13 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
440,95
(excl. BTW)
533,55
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 440,95
Related Products
The product family UP56 of ultrasonic level sensors ...
Description:
The product family UP56 of ultrasonic level sensors is the ideal solution for demanding applications. The teflon-protected transducer handles overpres-sure up to 6 bar (87 psi) and is resistant against numerous difficult fluids. Wetted parts can be chosen either as ...
• Suitable for measurements up to 12m (40 ...
Description:
• Suitable for measurements up to 12m (40 ft) • Easy installation and commissioning• Programming by 4 button HMI or SIMATIC PDM• Communication interface: HART• ETFE or PVDF converter supports chemical applications• Intelligent signal processing• Automatic echo error suppression ...
The Mobrey Integral ultrasonic level sensor switch is ...
Description:
The Mobrey Integral ultrasonic level sensor switch is intended for level detection at a fixed point when liquid fills the gap between the crystals. It has polyphenylene sulphide construction and two open-drain FET transistors (one conducting when the sensor is ...
Compact ultrasonic liquid level sensor with analogue current ...
Description:
Compact ultrasonic liquid level sensor with analogue current output for continuous measurement. Housing material PBT (plastic), transducer PVDFMeasuring range 0.25 to 5mM20x2 cable entryMeasurement is independent of density, opacity, conductivity or dielectric constant of liquidRugged, maintenance-free and ...