TE Connectivity, Nector S Cover for use with Distributor

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Distributors

For use with the MiniHVL Connector series
2 outlets

Approvals

VDE

NECTOR S Line

7.5mm MiniHVL connector series is designed according to IEC 60320 standard for lighting industry applications. Ideal for lighting applications where size and easy interconnection are prime requirements. Suitable for shop and household furniture, display cabinets and mountable lighting.

Specificaties
Kenmerk Waarde
Accessory Type Cover
For Use With Distributor
Series Nector S
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 02-12-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 5)
1,812
(excl. BTW)
2,193
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 70
€ 1,812
€ 9,06
75 - 120
€ 1,758
€ 8,79
125 +
€ 1,698
€ 8,49
*prijsindicatie
Related Products
The Hirose EF1 series sleeve power connector is ...
Description:
The Hirose EF1 series sleeve power connector is a simple assembly IN-Line power connector and is used for the mounting applications. It has a snap-in structure, which reduces assembly cost due to its simplicity and ability to reduce wiring steps. ...
Accessories for the Metrimate range of connectorsStock number ...
Description:
Accessories for the Metrimate range of connectorsStock number 710-0062 is a special shoulder mounting screw made from stainless steel with a M4 x 0.7-6G thread. This shoulder mounting screw is used for mounting Metrimate Drawer plug housings, two are required ...
The Han-Modular series is a system consisting of ...
Description:
The Han-Modular series is a system consisting of insert modules and frames into which the insert modules fit. These in turn may be fitted to standard Han® housings. The system allows a variety of insert configurations within the one connector ...
HA screw termination inserts which accept cable up ...
Description:
HA screw termination inserts which accept cable up to 2.5mm2and offer a separate earth terminal on each insert.,For technical specification refer to the HA introductory page for assembled connectors. Inserts fit all HA hoods or bases. Screw terminals with wire ...