Royce Thompson Electric 600mW Lighting Controller Detector, Cadmium Sulfide, Wall Mount, 230 V ac

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Electronic Control Kit (CdS Cell)

CdS Photocell operated dusk-till-dawn lighting controller

Fitted with a conical, UV stable, impact resistant, translucent cover
Omni-directional
Cadmium sulphide photocell operation

Supplied with

NEMA rotaloc socket, wall mounting bracket, gaskets and fixings

Daylight Lighting Controllers

These controllers automatically turn lights 'ON' and 'OFF' in response to changes in ambient light levels, primarily the transition from day to night and vice-versa. The more advanced types (see note below) have inbuilt logic to minimise false triggering, whereas the remainder have inbuilt time delays or higher 'OFF' thresholds, to prevent on/off cycling. As a general rule, these controllers should be sited such that they are not illuminated, by the light they are controlling. Nominal supply voltage is 230Vac.,Note regarding energy-saving negative-hysteresis controllers,Where figures for the 'OFF' threshold are lower than for the 'ON' threshold, the sensor is designed such that four thresholds are actually monitored. These are: dusk, the middle of the night, dawn and the middle of the day. Monitoring at times other than dusk and dawn enables the sensor to determine what it should be looking for next, minimising false triggering and improving overall controller operation.

Specificaties
Kenmerk Waarde
Controller Type Detector
Sensor Type Cadmium Sulfide
Voltage Rating 230 V ac
Mount Type Wall
Power Consumption 600mW
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
304 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
24,58
(excl. BTW)
29,74
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 24,58
Related Products
These Thorlux Lighting T5 Fluorescent battens are a ...
Description:
These Thorlux Lighting T5 Fluorescent battens are a high quality British made product. These High efficiency battens are built in ultra slim profile with steel end caps and body finished in Non Yellowing white. High frequency ballast to minimise running ...
Lighting controllers designed for use within offices and ...
Description:
Lighting controllers designed for use within offices and warehouses. Available with dual sensors for detecting ambient light and physical movement. Outputs are in the form of switch contacts (standard types). A dimming control output version is available for use with ...
A long range microwave detector designed for use ...
Description:
A long range microwave detector designed for use in applications such as warehouses, sports halls, churches etc. Sealed enclosure with a stainless steel detachable bracket for mounting to wall or ceiling with an adjustable angleSimplified installation with integral sensor and ...
This series of miniature PIR presence/absence detectors provide ...
Description:
This series of miniature PIR presence/absence detectors provide automatic control of lighting loads with optional manual control. The units come complete with flush fixing clip allowing unobtrusive flush mounting into ceiling tiles or solid ceilings.,Three models are available:Basic, Premium and ...