WJ Furse Copper Cable to Tape Clamp Max. Conductor Size 25 x 3mm

  • RS-stocknr. 153-2964
  • Fabrikantnummer CT105-H
  • Fabrikant WJ Furse
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Furse Tape Crossover Clamp

Furse Tape Crossover Clamp is designed for forming cross, tee, through and right angle joints with tapes that are fixed to a building or structure. The screws are retained in 1 part of clamp with O rings when fitting conductor to prevent screws being lost and ensure a simple installation.

Features

High quality copper and aluminium alloys Low resistance connection between overlapping tapes
Simple to install
Tightening torque 5 Nm

Applications

Used to form straight through, cross or tee joints in tape and bar.

Standards

IEC/BS EN 62561-1 Class H

Supplied with

UL96

Manufactured from high quality copper and aluminium alloys. Simple to install, providing an effective low resistance connection between overlapping tapes. The clamped connection is easily made/remade to allow for periodic testingTightening torque CN005 15 Nm, CN105-H 13 NmNot as illustrated (drawing available on request)UL96 (CN105-H)

Specificaties
Kenmerk Waarde
Material Copper
Maximum Conductor Size 25 x 3mm
50 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
7,055
(excl. BTW)
8,537
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 90
€ 7,055
€ 70,55
100 - 190
€ 6,915
€ 69,15
200 - 390
€ 6,569
€ 65,69
400 - 790
€ 6,239
€ 62,39
800 +
€ 5,618
€ 56,18
*prijsindicatie
Related Products
Furse non-metallic DC tape clips are designed to ...
Description:
Furse non-metallic DC tape clips are designed to fix conductors to a building or structure. High-grade polypropylene Easy installation Resists high pull off loads UV stabilised Non-brittle with high pull off loads Match bare and PVC covered copper and aluminium ...
Furse Tape Bonding Clamp is designed to facilitate ...
Description:
Furse Tape Bonding Clamp is designed to facilitate bonding to steel structures onto a lightning protection system. High-quality copper and aluminium alloys Suit maximum tape width 26 mm.
Furse tape junction lamp is designed to connect ...
Description:
Furse tape junction lamp is designed to connect lightning protection to earthing system and facilitate periodic testing.The clamped connection is easily made/remade to allow for periodic testing. Manufactured from high quality copper and aluminium alloys Low resistance connection between overlapping ...
Furse metallic DC Tape Clip is designed to ...
Description:
Furse metallic DC Tape Clip is designed to fix down conductors to a building or structure. High-quality copper and aluminium alloys Excellent corrosion resistance High pull off loads.