WJ Furse Copper Lightning Earth Rod Nominal Rod dia. 9mm 3/8in

  • RS-stocknr. 153-2966
  • Fabrikantnummer RB005
  • Fabrikant WJ Furse
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Furse Lightning Unthreaded Copperbond Earth Rod

Furse Lightning Unthreaded Copperbond Earth Rod offers installers the most economical method of achieving a low earth resistance.

Features

High tensile strength
Low carbon steel core
Highly resistant to corrosion Copper thickness minimum 250 microns

Applications

Designed for use where extremely high corrosion resistance and long service life are required.

Lightning Earth Rods

Specificaties
Kenmerk Waarde
Material Copper
Nominal Rod Diameter 9mm
20 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Pack of 10)
6,191
(excl. BTW)
7,491
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 90
€ 6,191
€ 61,91
100 - 190
€ 6,067
€ 60,67
200 - 390
€ 5,764
€ 57,64
400 - 790
€ 5,474
€ 54,74
800 +
€ 4,927
€ 49,27
*prijsindicatie
Related Products
Steel and nylon tapes that enable wires and ...
Description:
Steel and nylon tapes that enable wires and cables to be drawn through conduit and trunking etc. 50ft of 1/8in (3.2mm) width flat steel tapeBlued finish resists corrosionComplete with winder.
Furse Rod to Tape Clamp (Type A) is ...
Description:
Furse Rod to Tape Clamp (Type A) is designed to connect earth rod to copper tape to complete earth rod assembly. Conductivity and mechanical strength are essential considerations in clamp design to ensure that an earthing system remains operative for ...
Furse Rod to Cable Clamp (type B) is ...
Description:
Furse Rod to Cable Clamp (type B) is designed to provide a high quality, low-resistance connection between stranded conductor and earth rod. High-quality copper and aluminium alloys Phosphor bronze fitting.
Furse Lightning Earth Rod Driving Stud enables the ...
Description:
Furse Lightning Earth Rod Driving Stud enables the installer to put the earth rod into the ground. The driving stud is designed for driving copperbond threaded earth rods by hand or power hammer. 5⁄8” Driving Stud.