WJ Furse Copper Lightning Earth Rod 5/8in

  • RS-stocknr. 153-2968
  • Fabrikantnummer RB205-FU
  • Fabrikant WJ Furse
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Furse Lightning Threaded Copperbond Earth Rod

Furse Lightning Threaded Copperbond Earth Rod offers installers the most economical method of achieving a low earth resistance.

Features

High tensile strength Low carbon steel core
Highly resistant to corrosion
Copper thickness minimum 250 microns

Applications

Designed for use where extremely high corrosion resistance and long service life are required.

Standards

IEC/BS EN 62561-2
BS 7430

Furse copperbond earth rods probably offer to the installer the best and most economical earth rods available. They are made by molecularly bonding 99.9% pure electrolytic copper on to a low carbon steel core. Furse rods are not of the sheathed type. They are highly resistant to corrosion, and because the steel used has a very high tensile strength, they can be driven by power hammers to great depths.The counter-bored couplings are made from high copper content alloy, commercial brass is not used. This again ensures excellent corrosion resistance and high strength.

Lightning Earth Rods

Specificaties
Kenmerk Waarde
Material Copper
60 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Pack of 10)
10,578
(excl. BTW)
12,799
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 90
€ 10,578
€ 105,78
100 - 190
€ 10,367
€ 103,67
200 - 390
€ 9,848
€ 98,48
400 - 790
€ 9,357
€ 93,57
800 +
€ 8,421
€ 84,21
*prijsindicatie
Related Products
The RS Pro range of Bronze rod and ...
Description:
The RS Pro range of Bronze rod and tubes, offer great machining qualities and a high degree of resistance to corrosion. Suitable for different types of applications. To BS1400: 1985: PBI ConcastProduced to nominal size + 1/32 in. plus toleranceHigh ...
Steel and nylon tapes that enable wires and ...
Description:
Steel and nylon tapes that enable wires and cables to be drawn through conduit and trunking etc. 50ft of 1/8in (3.2mm) width flat steel tapeBlued finish resists corrosionComplete with winder.
A general purpose free-machining lead bronze. Although lower ...
Description:
A general purpose free-machining lead bronze. Although lower in tensile strength than phosphor bronze, it possesses good bearing properties with the ability to conform to minor shaft misalignments. The presence of lead reduces friction, running temperature and the possibility of ...
Furse Rod to Tape Clamp (Type A) is ...
Description:
Furse Rod to Tape Clamp (Type A) is designed to connect earth rod to copper tape to complete earth rod assembly. Conductivity and mechanical strength are essential considerations in clamp design to ensure that an earthing system remains operative for ...