Honeywell Plunger Limit Switch, 2NO/2NC, IP66, DPDT, Die Cast Zinc Housing, 250V ac Max, 10A Max
- RS-stocknr.:
- 808-7579
- Fabrikantnummer:
- DTE6-2RN80
- Fabrikant:
- Honeywell
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Alternatief
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.
- RS-stocknr.:
- 808-7579
- Fabrikantnummer:
- DTE6-2RN80
- Fabrikant:
- Honeywell
Datasheets
Wetgeving en compliance
- Land van herkomst:
- US
Productomschrijving
DTE6 Medium Duty Limit Switches
The DTE6 limit switch series from Honeywell is designed for use within a medium duty environment. This range of industrial limit switches are offered with or without actuator seal boots. Both have a combination insulator/seal cemented inside the bottom enclosure. Lead washers are used to seal the mounting holes on the DTE6 side mountable switches. Removal of the bottom enclosure exposes the terminals for easy wiring.
Side mount
Zinc die-cast housing
Zinc die-cast housing
Approvals
UL, CSA.
Specificaties
Kenmerk | Waarde |
|---|---|
| Actuator Type | Plunger |
| Pole and Throw Configuration | DPDT |
| Normal State Configuration | 2NO/2NC |
| IP Rating | IP66 |
| Maximum Current | 10A |
| Housing Material | Die Cast Zinc |
| Maximum AC Voltage | 250V |
| Maximum DC Voltage | 250V |
| Connection Type | 1/2 in NPT |
| Action Type | Snap Action |
| Length | 77.22mm |
| Minimum Operating Temperature | -32°C |
| Width | 25.4mm |
| Depth | 44.45mm |
| Maximum Operating Temperature | +71°C |
| Mounting Orientation | Vertical |
- RS-stocknr.:
- 808-7579
- Fabrikantnummer:
- DTE6-2RN80
- Fabrikant:
- Honeywell