Maxim MAX251CPD+, Line Transceiver, RS-232 2-TX 2-RX, 5 V, 14-Pin PDIP

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

RS-232 Dual Transmitters/Receivers, Maxim Integrated

The Maxim family of dual RS232 line drivers and receivers are intended for all EIA/TIA-232E, V.24 and V.28 communications interface. Maxim’s RS232 dual transmitter/receiver will allow applications such as interface translation, modem, laptop as well as RS232 battery-powered systems due to their low-power shutdown mode. The multichannel transceiver MAX233, MAX235 have no external components therefore are ideal where space is crucial.

Multichannel RS232 Driver/Receiver (RS232 Transceiver)
Data Rates range from 120 kbit/s to 1 Mbit/s
Low-power shutdown mode reduces power dissipation
Low-Voltage
Some RS232 Transceivers may incorporate 0.1uF External Capacitors
Integrated ESD Applications

Applications

• High Speed Modems
• Battery Powered Equipment
• Notebook, Subnotebook, and Palmtop Computers
• Printers
• Handheld Equipment
• Peripherals

Note

Please note that any defect or non – conformance of this product must be discovered and reported to RS within 20 days of purchase.

RS-232 Line Drivers and Receivers

Specificaties
Kenmerk Waarde
Number of Transmitters 2
Package Type PDIP
Mounting Type Through Hole
Pin Count 14
Number of Receivers 2
Typical Single Supply Voltage 5 V
Interface Standards RS-232
Transmitter Signal Type Single Ended
Receiver Signal Type Single Ended
Minimum Operating Temperature 0 °C
Maximum Operating Temperature +70 °C
Width 7.87mm
Length 19.43mm
Dimensions 19.43 x 7.87 x 4.45mm
Number of Drivers per Line 1
Power Supply Type Single
Number of Receivers per Line 1
Height 4.45mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 21-04-2022, met een levertijd van 2 à 3 werkdagen.
Prijs Each
7,96
(excl. BTW)
9,63
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 7,96
5 - 9
€ 7,22
10 +
€ 7,04
Verpakkingsopties
Related Products
Description:
The ADM3065E is a 3.0 V to 5.5 V, IEC electrostatic discharge (ESD) protected RS-485 transceiver, allowing the device to withstand ±12 kV contact discharges on the transceiver bus pins without latch-up or damage. The ADM3066E features a VIO logic ...
Linear Technology’s RS485 standards are widely used in ...
Description:
Linear Technology’s RS485 standards are widely used in local networks as well as data transfer over long distances and they are ideal in industrial and commercial applications. The Profibus (Process Field Bus) protocol is carried out for fieldbus solutions in ...
460 kbps Data RateSpecified at 3.3 V0.1 μF ...
Description:
460 kbps Data RateSpecified at 3.3 V0.1 μF Charge Pump CapacitorsUpgrade for MAX3222/32 and LTC1385Low Power Shutdown (ADM3222E and ADM1385)DIP, SO, SOIC, SSOP and TSSOPPackage Options±8 kV: Contact Discharge±15 kV: Air-Gap DischargeApplicationsGeneral-purpose RS-232 data link Portable instruments Printers, ...
Green Idle power-saving mode Single 2.7 V to ...
Description:
Green Idle power-saving mode Single 2.7 V to 3.6 V power supply Operates with 3 V logic 0.1 μF to 1 μF charge pump capacitors Low EMI Low power shutdown: 20 nA Full RS-232 compliance460 kb/s data rate One receiver ...