Maxim MAX3233EEWP+G36, Line Transceiver, EIA/TIA-232, RS-232, V.24, V.28 2-TX 2-RX 2-TRX, 3 → 3.6 V, 20-Pin SOIC

  • RS-stocknr. 732-9320
  • Fabrikantnummer MAX3233EEWP+G36
  • Fabrikant Maxim
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

RS-232 Dual Transmitters/Receivers, Maxim Integrated

The Maxim family of dual RS232 line drivers and receivers are intended for all EIA/TIA-232E, V.24 and V.28 communications interface. Maxim’s RS232 dual transmitter/receiver will allow applications such as interface translation, modem, laptop as well as RS232 battery-powered systems due to their low-power shutdown mode. The multichannel transceiver MAX233, MAX235 have no external components therefore are ideal where space is crucial.

Multichannel RS232 Driver/Receiver (RS232 Transceiver)
Data Rates range from 120 kbit/s to 1 Mbit/s
Low-power shutdown mode reduces power dissipation
Low-Voltage
Some RS232 Transceivers may incorporate 0.1uF External Capacitors
Integrated ESD Applications

Note

Please note that any defect or non – conformance of this product must be discovered and reported to RS within 20 days of purchase.

RS-232 Line Drivers and Receivers

Specificaties
Kenmerk Waarde
Number of Transmitters 2
Package Type SOIC
Mounting Type Surface Mount
Pin Count 20
Number of Receivers 2
Typical Single Supply Voltage 3 → 3.6 V
Data Rate 250kbps
Number of Transceivers 2
Interface Standards EIA/TIA-232, RS-232, V.24, V.28
Transmitter Signal Type Single Ended
Receiver Signal Type Single Ended
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Number of Drivers per Line 1
Dimensions 13 x 7.6 x 2.35mm
Length 13mm
Power Supply Type Single
Width 7.6mm
Height 2.35mm
Number of Receivers per Line 1
33 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
8,22
(excl. BTW)
9,95
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 8,22
5 - 9
€ 7,24
10 +
€ 7,12
Verpakkingsopties
Related Products
The MAX14827A integrates the high-voltage functions commonly found ...
Description:
The MAX14827A integrates the high-voltage functions commonly found in industrial sensors, including drivers and regulators. The MAX14827A features two ultra-low-power drivers with active reverse-polarity protection. Operation is specified for normal 24V supply voltages up to 60V. Transient protection is simplified ...
Low Voltage Differential Signaling, or LVDS, is an ...
Description:
Low Voltage Differential Signaling, or LVDS, is an electrical signaling system that can run at very high speeds over cheap, twisted-pair copper cables. Applications: Firewire, SATA, SCSI.
A range of devices which conform to the ...
Description:
A range of devices which conform to the HART (Highway Addressable Remote Transducer) industrial communications protocol. HART communications frequently utilize 4-20mA networks and are widely used in Automation and Control applications. The HART standard provides for both point-to-point (analogue or ...
The STHV800 is an octal, monolithic, high-voltage and ...
Description:
The STHV800 is an octal, monolithic, high-voltage and high-speed pulse generator designed for medical ultrasound applications. High density ultrasound transmitterTwo independent half-bridges per channel0 to ±90 V output voltagePower-up freeSynchronisation of the input signals by an external clockUp to 20 ...