INA Linear Ball Bearing Block GWA20

  • RS-stocknr. 172-1202
  • Fabrikantnummer GWA20
  • Fabrikant INA
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Shaft support blocks are used to support shafts and locate the ends of the shaft.
They are suitable for all the solid and hollow shafts in this catalogue.
They are made from either an aluminium alloy or pressure diecast zinc.
Series GWA is identical in design to series GW but is suitable for larger fixing screws.
Depending on the series, the shaft support blocks have through holes or threaded holes.

Specificaties
Kenmerk Waarde
Housing Height 50mm
Housing Length 20mm
Housing Width 60mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 31-12-2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
42,95
(excl. BTW)
51,97
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 42,95
5 - 9
€ 41,71
10 +
€ 40,47
Related Products
Fixed bearing with angular contact thrust ball bearing. ...
Description:
Fixed bearing with angular contact thrust ball bearing. Precision pillow block housing made of steel with reference edges on two sidesAngular contact thrust ball bearing LGNSlotted nut NMZHousing nut GWRThe nut is supplied unmounted.
Floating bearing with deep-groove ball bearing per DIN ...
Description:
Floating bearing with deep-groove ball bearing per DIN 625. Precision pillow block unit housing made of steel with reference edge on one sideDeep-groove ball bearing per DIN 625-…2RSRetaining ring per DIN 471CoverAll parts are supplied unmounted.
LSCS shaft blocks are aluminium alloy extrusions. The ...
Description:
LSCS shaft blocks are aluminium alloy extrusions. The individual block can clamp one shaft end only. The base has two through holes for mounting.
Closed housing design for use with LBCR linear ...
Description:
Closed housing design for use with LBCR linear ball bearing and LPAR linear plain bearings. Integral grease nipple.