INA Linear Ball Bearing Unit KGB40-PP-AS

  • RS-stocknr. 172-1244
  • Fabrikantnummer KGB40-PP-AS
  • Fabrikant INA
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Linear bearings and linear bearing and housing units are available in the compact, light, heavy duty, machined and plain bearing range. The bearings can support high loads while having a relatively low mass and allow the construction of linear guidance systems with unlimited travel. Each series has quite specific characteristics that makes it particularly suitable for certain applications.

Linear bearings
Compensation of misalignment
Linear bearing and housing units
Simple location
Housing designs
Highly cost-effective
Sealing
Lubrication
Operating temperature
Operating limits
Suffixes
Machined range
Linear ball bearings
Seals
Linear ball bearing and housing units

Specificaties
Kenmerk Waarde
For Bearing Type Closed
Bearing Inside Diameter 40mm
Housing Dimensions 80 x 108 x 83.5mm
Dynamic Load Rating 6000N
Static Load Rating 4400N
Housing Width 108mm
Housing Height 83.5mm
Housing Length 80mm
Series KGB
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
185,43
(excl. BTW)
224,37
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 185,43
5 +
€ 179,84
Related Products
FAG from Schaeffler self-aligning ball bearings are double ...
Description:
FAG from Schaeffler self-aligning ball bearings are double row, self-retaining units. They comprise of solid outer rings with a concave raceway, inner rings with a cylindrical or tapered bore and ball and cage assemblies. The bearings are available in open ...
Single row angular contact ball bearings are self-retaining ...
Description:
Single row angular contact ball bearings are self-retaining units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet metal or brass cages. The raceways of the inner and outer rings are offset from each other ...
The design envelope is not sufficient under high ...
Description:
The design envelope is not sufficient under high loads for a pair of single row angular contact ball bearingsHigh radial and axial loads are acting simultaneouslyTilting moments must also be supportedA relatively rigid bearing arrangement is requiredThe bearing arrangement is ...
Bearings designed for use where high axial loads ...
Description:
Bearings designed for use where high axial loads exist and where axial positional control is required. The metric series have a 40° contact angle and a polyamide cageThe imperial series have a 20° contact angle and a machined brass cage. ...