INA Linear Ball Bearing Unit KTSG25-PP-AS

  • RS-stocknr. 194-7242
  • Fabrikantnummer KTSG25-PP-AS
  • Fabrikant INA
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Linear bearings and linear bearing and housing units are available in the compact, light, heavy duty, machined and plain bearing range.
The bearings can support high loads while having a relatively low mass and allow the construction of linear guidance systems with unlimited travel
Each series has quite specific characteristics that makes it particularly suitable for certain applications. These may include, for example, requirements for compensation of misalignments, low‑friction running, high accelerations and travel speeds or long operating life
The range, which has been constructed and expanded in accordance with a modular concept, provides the best technical and economic solution, in relation to each application, for bearing arrangements with shaft guidance systems

Specificaties
Kenmerk Waarde
For Bearing Type Closed
Bearing Inside Diameter 25mm
Housing Dimensions 122 x 78 x 60mm
Dynamic Load Rating 6400N
Static Load Rating 8600N
Housing Width 78mm
Housing Height 60mm
Housing Length 122mm
Series KTSG
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
229,05
(excl. BTW)
277,15
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 229,05
5 - 9
€ 219,89
10 +
€ 215,31
Related Products
Rolled ball screws offer a quick and economical ...
Description:
Rolled ball screws offer a quick and economical method of assembling a highly accurate, repeatable and smooth operating linear motion system. Interchangeable threaded shafts and nuts in 14, 20 and 25mm diameters. The threaded shaft is not machined so it ...
The Compact Linear Bushing is distinguished by its ...
Description:
The Compact Linear Bushing is distinguished by its compact dimensions. Through the use of integrated metal locking rings, this type eliminates the need for the otherwise typical axial fasteners in the mounting hole. Also available in corrosion-resistant format. Low cost ...
’Frelon’ liner resists most chemicals and withstands vibration ...
Description:
’Frelon’ liner resists most chemicals and withstands vibration and shock. Operating temperature range is -240 to +260°C. Suitable for rotary motion. Silent, self-lubricating operation. Maximum Speed Dry: 91.4 m/minMaximum Speed Lubricated: 251.4 m/minMaximum PV Product: 430 m/min x kg/cm².
Share the same dimensions as LBBR ball bushingsPolyacetal ...
Description:
Share the same dimensions as LBBR ball bushingsPolyacetal with specific polyethylene bearing surfacesLow-maintenance. Good emergency running properties and low “stick”Resistant to heavy static stress and insensitive to shocksInitial lubrication necessary, even if dry running is required later.