SKF Linear Ball Bearing LBBR 10-2LS

  • RS-stocknr. 284-9087
  • Fabrikantnummer LBBR 10-2LS
  • Fabrikant SKF
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

LBBR Ball Bushings With Double Seal - Closed

Conforms to Series 1 of ISO10285
Sealed bearings fitted with double lip seals

//media.rs-online.com/t_line/LD284899-01.gif
//media.rs-online.com/t_line/LF284899-10.gif

SKF Linear Ball Bushings & Sets

Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that higher frictional forces must be expected with linear plain bearings.,Ball bushings comprise a cage, in which the balls are guided, along with the raceway segments and integral seals,Further axial securing is often unnecessary when linear ball bearings and linear plain bearings are pressed into a J7 or J6 tolerance hole.

Specificaties
Kenmerk Waarde
Linear Ball Bearing Type Closed
Seals With Seals
Inside Diameter 10mm
Outside Diameter 17mm
Length 26mm
Dynamic Load Rating 585N
Static Load Rating 415N
105 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
9 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
18,11
(excl. BTW)
21,91
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 18,11
5 - 9
€ 17,38
10 +
€ 17,03
Related Products
Standard SKF linear bearings can be used to ...
Description:
Standard SKF linear bearings can be used to construct linear guidance systems over a wide variety of applications. These bearings are manufactured to ISO 10285 standards. SKF linear ball bearings have the advantage of being corrosion resistant due to a ...
The Super-Linear Bushing has a built-in inertial error ...
Description:
The Super-Linear Bushing has a built-in inertial error compensator, that compensates for the angle between the housing and shaft up to 0.5 degrees tilt without reducing the capacity due to angular pressure. Possible causes for internal errors include shaft flex ...
The Compact Linear Bushing is distinguished by its ...
Description:
The Compact Linear Bushing is distinguished by its compact dimensions. Through the use of integrated metal locking rings, this type eliminates the need for the otherwise typical axial fasteners in the mounting hole. Also available in corrosion-resistant format. Low cost ...
The standard linear bushing is extremely robust thanks ...
Description:
The standard linear bushing is extremely robust thanks to its steel ball retainer and designed for applications with a high level of soiling, such as woodworking. Standard linear bushings without seals are available for use at very high temperatures. The ...