SKF Linear Ball Bearing 2202051

  • RS-stocknr. 284-9172
  • Fabrikantnummer LBBR 10/HV6
  • Fabrikant SKF
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

SKF Linear Bearings

Standard SKF linear bearings can be used to construct linear guidance systems over a wide variety of applications. These bearings are manufactured to ISO 10285 standards. SKF linear ball bearings have the advantage of being corrosion resistant due to a corrosion inhibiting preservative.

Can be used on a wide variety of applications
ISO 10285
Coated with a corrosion inhibitor

//media.rs-online.com/t_line/LD284899-01.gif

SKF Linear Ball Bushings & Sets

Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that higher frictional forces must be expected with linear plain bearings.,Ball bushings comprise a cage, in which the balls are guided, along with the raceway segments and integral seals,Further axial securing is often unnecessary when linear ball bearings and linear plain bearings are pressed into a J7 or J6 tolerance hole.

Specificaties
Kenmerk Waarde
Linear Ball Bearing Type Closed
Seals Without Seals
Inside Diameter 10mm
Outside Diameter 17mm
Length 26mm
Dynamic Load Rating 585N
Static Load Rating 415N
45 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
21,19
(excl. BTW)
25,64
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 21,19
5 - 9
€ 20,33
10 +
€ 19,92
Related Products
INA from Schaeffler linear ball bearings KH and ...
Description:
INA from Schaeffler linear ball bearings KH and linear ball bearing and housing units of the compact range have a small radial design envelope and are economical. Their low radial section height automatically makes them attractive for applications in which ...
SKF thrust ball bearings are designed to hold ...
Description:
SKF thrust ball bearings are designed to hold axial loads produced during shaft rotation and must not be exposed to any radial loads. These bearings consist of two strong and ground thrust plates with matching ball grooves on one side ...
This range of ball bearings from SKF are ...
Description:
This range of ball bearings from SKF are deep groove metric ball bearings with an open end. They are extremely versatile for a wide range of applications.SKF single row, deep groove ball bearings are available with an inner diameter from ...
Designed to house ball bushings from 8mm to ...
Description:
Designed to house ball bushings from 8mm to 25mmAluminium constructionDIN 472 circlip fixing required.